Haltech Haltech Elite 1500 + Honda Civic EP3 Plug 'n' Play Adaptor Harness Kit MSRP: Was: Now: $2,120.00 Add to Cart
FuelTech FuelTech RIFE ProMod Series Transmission Combo Pack for TH400 Lock Up Transmission Pressure Triple Sensor Block Kit with Mount MSRP: Was: Now: $590.00 Add to Cart
FuelTech FuelTech Wilson Manifolds 4150 Throttle Body - 1287CFM MSRP: Was: Now: $1,177.00 Add to Cart
Haltech Haltech CAN Adaptor Loom DTM-4 to 6-pin Circular Connector MSRP: Was: Now: $56.00 Add to Cart
Haltech Haltech Elite 2500 + GM GEN III LS1 & LS6 non DBW Terminated Harness Kit (EV1) MSRP: Was: Now: $2,629.00 Add to Cart
FuelTech FuelTech Wilson Manifolds 4500 Dominator Throttle Body - 2.00" Bore - 1745 CFM MSRP: Was: Now: $1,297.00 Add to Cart
Haltech Haltech Nexus S2 ECU + Universal Wire-in Harness - 2.5m (8') MSRP: Was: Now: $2,235.00 Add to Cart
FuelTech FuelTech SparkPRO-1 Description Downloads FuelTech’s SparkPRO-1 is a high-energy inductive ignition module designed to be used with ignition coils without an igniter (dumb coils). The SparkPRO-1 has 1 ignition outputs, each output may be connected to only one coil at a... MSRP: Was: Now: $159.00 - $177.00 Choose Options
Haltech Haltech Elite 1500 + Honda Civic EP3 Plug 'n' Play Adaptor Harness Kit ECU OverviewElite 1500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4vcylinder, Drive-By-Wire (DBW) or 2 rotor engines, EFI conversions, engines with multiple variable camshafts... MSRP: Was: Now: $2,120.00 Add to Cart
Haltech Haltech Nexus S2 ECU Only ECU OverviewHaltech's Nexus S2 is the successor to the acclaimed Elite 1500, offering a serious upgrade in performance and functionality. The S2 combines all the classic functionality of the Elite 1500 with new features and the superior processing power... MSRP: Was: Now: $1,830.00 Add to Cart
Haltech Haltech CAN Adaptor Loom DTM-4 to Flying Leads CAN Adaptor Loom (DTM-4 to Flying leads ) - Suits AMP Superseal 1.0 series ConnectorProduct DetailsSuits: Haltech IC-7 Dash, WB1, WB2, and aftermarket ECUs using the AMP Superseal 1.0 Series ConnectorIncludes: 1 x HT-130046 CAN Adaptor Loom (DTM-4 to... MSRP: Was: Now: $28.00 Add to Cart
FuelTech FuelTech RIFE ProMod Series Transmission Combo Pack for TH400 Lock Up Transmission Pressure Triple Sensor Block Kit with Mount Included: 500PSI sensor: Lock up Pressure 500PSI sensor: Line Pressure 500PSI sensor: Converter Pressure Rear tail housing Transmission Mounting Bracket Spacer washers to accommodate different tail housings 1.5' M5 Cable (52-1311) 1/8" NPT Fluid... MSRP: Was: Now: $590.00 Add to Cart
Haltech Haltech Elite 2500 ECU + Plug and Pin Set ECU OverviewElite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications. Recommended for 4, 6, 8 cylinder, Drive-By-Wire (DBW) or 2, 3, 4 rotor engines, EFI conversions, engines with multiple variable... MSRP: Was: Now: $2,087.00 Add to Cart
FuelTech FuelTech EGT Compression Fitting - Weld Bung The EGT Compression Fitting - Weld Bung is designed for secure and precise installation of exhaust gas temperature (EGT) sensors in high-performance applications. Made from durable materials, this weld bung ensures a tight, leak-free fit, providing... MSRP: Was: Now: $13.00 Add to Cart
FuelTech FuelTech Flex Fuel Sensor Connector Kit FuelTech flex fuel sensor connector kit.Part number: 5011100354. MSRP: Was: Now: $12.00 Add to Cart
FuelTech FuelTech FT Injector 125 lb/h GEN 3 The FT Injector 125lb/hr is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector is compatible with all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE)... MSRP: Was: Now: $209.00 Add to Cart
FuelTech FuelTech 90 Degree Injector Boot Add these injector boots to your custom harness to protect the wiring and for a clean installation. *Injector connector not included. MSRP: Was: Now: $3.00 Add to Cart
FuelTech FuelTech Wilson Manifolds 4150 Throttle Body - 1287CFM Engineered for Maximum Horsepower & Durability Air Supremacy Design – Flows 1287 CFM, making it the highest flowing 4-blade 4150 throttle body on the market. Delivers incredible throttle response for peak performance. Stainless Steel 3-Way... MSRP: Was: Now: $1,177.00 Add to Cart
FuelTech FuelTech NanoPRO / WB-O2 Nano Mounting Bracket FuelTech's NanoPRO / WB-O2 Nano Mounting Bracket is designed for convenience and durability. The mount is easily attached to any hard surface in less than 1 minute using the peel and stick automotive grade adhesive at the base of the mount and the Nano's... MSRP: Was: Now: $29.00 Add to Cart
Haltech Haltech uC-10 Moulded Panel Mount uC-10 Moulded Panel MountProduct DetailsSuits: Haltech uC-10 Display DashIncludes: 1 x uC-10 Moulded Panel Mount- BlackNotes: Suits Haltech uC-10 Display Dash Panel is textured. Made from UV stabilised ABS Plastic MSRP: Was: Now: $140.00 Add to Cart
Haltech Haltech CAN Adaptor Loom DTM-4 to 6-pin Circular Connector CAN Adaptor Loom (DTM-4 to 6 pin Circular Connector ) - Suits Dual Connector Link ECU'sProduct DetailsSuits: Haltech iC-7 Dash, WB1, WB2 and Link Wire-in ECUs (Storm, Extreme, Fury, Thunder, Force GDI)Includes: 1 x CAN Adaptor Loom (DTM-4 to 6-pin... MSRP: Was: Now: $56.00 Add to Cart
Haltech Haltech NEXUS Rebel LS - Suits Gen III With the Rebel LS, all the hard work is done. It is the best, quickest, and easiest way to get your LS-swap up and running!ECU designed from the ground up to suit GM's popular LS engine platformStart-up is a breeze thanks to the new LS Set-up Wizard in... MSRP: Was: Now: $1,695.00 Add to Cart
FuelTech FuelTech Vacuum Distribution Manifold FuelTech's billet vacuum distribution manifold is the perfect solution for running and organizing all of the vacuum lines on your race car. With 7 vacuum ports (4 x 1/8 npt and 3 x 1/4 npt) there is plenty of room to run all of your vacuum lines for blow... MSRP: Was: Now: $89.00 Add to Cart
FuelTech FuelTech FT550 2024+ Rotax 325 Harness Description Downloads The FT550 2024+ Rotax 325 Harness, designed by FuelTech, is the perfect solution for FuelTech FT550 ECU installation using the PWC OEM harness. The wiring harness adapter has all connections to quickly and easily install... MSRP: Was: Now: $1,099.00 - $3,596.00 Choose Options
Haltech Haltech Elite 2500 + GM GEN III LS1 & LS6 non DBW Terminated Harness Kit (EV1) Harness OverviewThe fastest and most cost effective way to wire your race car or engine conversion!Simply connect a handful of labelled wires and this plug and Play product allows you to be up and running in just a few hours.ECU OverviewElite 2500 is a... MSRP: Was: Now: $2,629.00 Add to Cart
FuelTech FuelTech Bosch LSU 4.2 Wideband O2 Sensor The Bosch LSU 4.2 Wideband O2 Sensor supports closed loop O2 maintaining optimal fuel delivery by delivering accurate measurements of the engine's air-fuel ratio to the ECU in real-time, determining the lambda value. Fuel Compatibility:The Bosch LSU 4.2... MSRP: Was: Now: $99.00 - $107.00 Choose Options
FuelTech FuelTech FT Injector 85 lb/h GEN 3 The FT Injector 85lb/hr is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector is compatible with all available fuels (gasoline, ethanol, alcohol, nitromethane, nitropropane, MTBE and ETBE)... MSRP: Was: Now: $204.00 Add to Cart
FuelTech FuelTech 6mm to 6mm In-Line Push Lock Union Fitting The FuelTech 6mm to 6mm In-Line Push Lock Union Fitting is engineered to connect two 6mm outer diameter hoses seamlessly. Perfect for extending or repairing FuelTech's Nylon Hoses for MAP Sensors, this in-line fitting provides a secure, leak-proof... MSRP: Was: Now: $7.00 Add to Cart
FuelTech FuelTech Wilson Manifolds 4500 Dominator Throttle Body - 2.00" Bore - 1745 CFM Wilson Manifolds High Flow Throttle Bodies were developed using the latest computer modeling software and test equipment available to produce designs that yield the maximum flow per square inch of cross-sectional area. This results in maximum power for... MSRP: Was: Now: $1,297.00 Add to Cart
Haltech Haltech Nexus S2 ECU + Universal Wire-in Harness - 2.5m (8') ECU OverviewHaltech's Nexus S2 is the successor to the acclaimed Elite 1500, offering a serious upgrade in performance and functionality. The S2 combines all the classic functionality of the Elite 1500 with new features and the superior processing power... MSRP: Was: Now: $2,235.00 Add to Cart
Haltech Haltech CAN Adaptor Loom DTM-4 to DTM-2 Suits Fueltech Used to connect supported Haltech CAN devices to the DTM-2 CAN connector found on Fueltech FT550 Lite, FT550, FT600, FT700 and FT700 Plus ECUs or harness kits like the LS550 V8, PRO550 Gen II V8, and PRO600 Gen III V8 complete harnesses.Product... MSRP: Was: Now: $35.00 Add to Cart
