Circle D

Circle D- Ford 245mm Pro Series 6R80 Torque Converter

The original 6r80 performance torque converter. Look no farther. 100 Square Inches of Clutch Lining for WOT Lock-Up  Furnace Brazed  Hand TIG Welded  Torrington Bearings  Billet Front and Billet Piston  Flanged Impeller Hub for...

Fueltech - Smartcoil Harness Pro 550 / FT600 FORD V8

The FuelTech PRO550/600 Smart Coil harness is a true plug and play expansion to complement both the PRO550 and PRO600 V8 harness. With this expansion harness the user can make the change to multi smart coils with ease! The harness is fitted with a 16 way...

Fueltech - Smartcoil (Each)

FuelTech's IGN1A inductive Smart Coils are the perfect ignition coil for your high performance application, With up to 175mj of energy and a long spark discharge time of 3.2ms. These coils provide great idle characteristics as well as the power to needed...

Fueltech - Wideband Nano WB-o2

Wideband O2 sensor display and conditioner for Bosch LSU 4.2 sensors.

Fueltech - PEAK & HOLD 8A/2A DRIVER w/ Harness

Peak and Hold 8A/2A Controls up to 4 injectors with impedance below 1.5 ohm 16 Bosch 160lb/h (1600cc) injectors (4 per channel) 8 Siemens low impedance injectors (2 per channel) 4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per...

Clevite - Gen1 & Gen2 Coated H-Series Main Bearings

Clevite coated H-Series main bearings were developed primarily for NASCAR racing, but are also well-suited to other types of competition engines. They are especially good for engines that run at medium-to high revs. They have steel backings with...

Holley

Holley - TERMINATOR X FORD MOD MOTOR 4V KIT (EV1 Injectors)

Introducing Terminator X and X Max Kits for the Modular Ford engine. These new kits will plug and play with either 2V or 4V Mod Motors commonly found in 1996-2004 Mustangs, 1995-2006 F150, or 2002-2005 Explorers. These kits will work with both 4.6 and 5...

Holley

Holley - TERMINATOR X FORD MOD MOTOR 4V KIT (EV6 Injectors)

Introducing Terminator X and X Max Kits for the Modular Ford engine. These new kits will plug and play with either 2V or 4V Mod Motors commonly found in 1996-2004 Mustangs, 1995-2006 F150, or 2002-2005 Explorers. These kits will work with both 4.6 and 5...

Moroso

Moroso U-Joint Straps

Made from steel, Moroso's u-joint Straps have a unique design which provides more bearing surface for the universal joint bearing cap. The result is greater strength compared to conventional girdles.

Strange

Strange- Chrome Moly 1350 Series Yoke Ford 8.8 Rear Ends

Yoke Inner Spline Quantity:30Yoke Material:ChromolyYoke Overall Length (in):3.150 in.Universal Joint Style:Spicer 1350Differential Case Design Type:Ford 8.8 in.Universal Joints Included:NoBearing Caps Included:NoBearing Straps Included:No

Moroso - 5.0L Coyote Aluminum Oil Pan

This fabricated Aluminum Moroso Race Oil Pan holds 2 more quarts than stock and is designed to be used with the factory windage tray, oil pump pickup, and dipstick making it perfect for race applications. Fabricated from aluminum this Moroso Oil Pan has...

TBM Brakes

TBM Brakes -15-23 Ford Mustang S550 Medium Duty Drag Racing Front Brake Kit (Reusing Factory Hubs)

Description This kit fits the following: 15-22 Ford Mustang (reusing factory hubs) medium duty Weight: 23 lbs Kit includes: F3 4 piston calipers 002-0192SSP #1 compound low temp track pads 6-0102W 11.75 x .500” thermally treated revolution...

TBM Brakes

TBM Brakes - 2005-14 Mustang S197 Medium Duty Drag Racing Front Brake Kit (Reusing Factory Hubs)

Description This kit fits the following: 05-14 (S197) Ford Mustang (reusing factory hubs) medium duty. Weight: 23 lbs Kit includes: F3 4 piston calipers 002-0192SSP #1 compound pads 6-0102W 11.75” x .500" Revolution Rotor...

TBM Brakes

TBM Brakes - 2015-22 Ford Mustang Front Brake Kit (Reusing Factory Hubs)

TBM Ford Front Drag Racing Brake Kits are extremely lightweight and are not suitable for use with factory rear brakes/proportioning. They must be used with a properly installed aftermarket-style 4 piston rear brake kit.   Description This kit...

Cometic Head Gasket 4.6L DOHC & SOHC, 5.4L SOHC RIGHT .075

Cometic MLS head gaskets are constructed from multiple layers of stainless steel for strength and contain load-controlled embossments that conform load distribution across the sealing area. This creates an exceptional seal by requiring less clamp...

Pac Racing Springs

PAC- RPM Series Ford 5.0L Gen 3 Coyote Ovate Wire Beehive

RPM Series Ford 5.0L Coyote Beehive RPM Valve Spring for Extreme RPM and Valve Lift   OD Large End1.061 ID Large End0.698 ID Small End0.525 Install Height1.600 Load at Installed Height115 Spring Open Height1.000 Spring Open Load300 Recommended...

Proformance Racing Transmission- External Dump Valve

Billet external dump valve.    Plumb this valve into the coolerline to help spool big turbos or control charge pressure.    12 volt operation  Twin valves for total adjustable both valves are able to be controlled with...

McLeod - RXT Clutch Kit w/Flywheel for 2018-2019 Mustang GT 5.0

Intended for the high horsepower street/strip fan, the McLeod RXT Street twin clutch kit with Aluminum Flywheel is an economically priced twin disc clutch kit. Able to handle 1000hp, this clutch can handle almost any horse-power you can throw at it and...

CE - Mod Motor Mid-Mount Plates

C/E mid-mount plates are designed to work with the aluminum front motor plates to further eliminate engine twist and prevent broken transmission cases in high-torque installations. Made from .090 in. thick mild steel, they allow easy transmission...

Boost Leash

Boost Leash / Pulse Leash combo unit

All Leashed Products are 4-5 week build time when ordered.  But this does change all the time   Boost Leash with built in transbrake Bump Box. One of a kind!!!! Billet Map/Pressure sensor comes standard now. There is a new option for the Boost...

Boost Leash

Boost Leash Boost Controller

All Leashed Products are 4-5 week build time when ordered.  But this does change all the time   Billet Map/pressure sensor comes standard now   There is a new option at the bottom for the Boost Leash. You have the option of upgrading ...

Lokar

Lokar- Hi-Tech Flexible Braided Stainless Transmission Dipstick (TH400)

Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover. The inner rod is stamped with appropriate trans-fluid...

Holley

Holley- 11-14 Mustang GT Race Series Intake Manifold (Black)

Holley Sniper EFI Fabricated Manifolds continues to push the aftermarket by introducing our latest Race Series line of intakes for GM LS 1/2/6 and Ford Coyote 5.0L engine platforms. Feedback from racers and install shops, related to our original line of...

DSS- 2015+ Mustang 2000HP Rated Pro-Level Axles

Approximately 4-5 weeks build time. This can vary   Introducing the new 2015+ Mustang 2000HP Rated Pro-Level Axles from The Driveshaft Shop.The new Pro-Level axles are a complete redesign with the intention to not only increase strength, but...