Procharger Coyote Crank Support

Is the crank support absolutely mandatory? Not really, but consider it cheap insurance with the Coyote engine, just like billet oil pump gears.  More boost and rpm mean more load on the crank snout—in high boost/high-horsepower...

Circle D- HP Series 10R80 Torque Converter

This is an excellent choice for your 2018+ Ford Mustang and F150! This converter is based off the original factory converter paired with our CNC machined Billet Stator and custom Impeller modifications. We have options available to accommodate a...

RGR - Coyote Secondary Timing Chain Kit 18-22 (Gen 3)

Secondary timing chain kit upgrade for your gen 3 coyote    Much stronger over factory  Uses 4.6/5.4 Mod Motor Secondary Chains  No more secondary timing failure  Precision Machined in the USA  Heat Treated...

TBM Brakes

TBM Brakes - 15-23 Ford Mustang S550 Rear Drag Racing Brake Kit (Reusing Factory Hubs)

  15-22 Ford Mustang S550 Rear Drag Racing Brake Kit (Reusing Factory Hubs) - 001-0297-1 Note: This Kit retains usage of factory ABS functionality Note: This Kit requires usage of an included drill fixture to drill and tap holes in factory spindles...

MSD - Spark Plug Wires (Coyote with Smart Coil)

Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 - 50 ohms of resistance! That is the...

RGR- Coyote Secondary Timing Chain Kit 15-17 (Gen 2)

Secondary timing kit upgrade for your gen 2 coyote    Much stronger over factory  No more secondary timing failure  Higher HP durable material  Kit Includes secondary gears and chains 

RGR - Coyote Secondary Timing Chain Kit 11-14 (Gen 1)

Secondary timing kit upgrade for your gen 1 coyote    Much stronger over factory  No more secondary timing failure  Higher HP durable material  Kit Includes secondary gears and chains 

Fueltech- FT Injector 820lb/h

FEATURES   REAL flow, all injectors are tested, and calibrated to ensure linearity, repeatability and accuracy for all cylinders It has internal components resistant to corrosion, guaranteed by the salinization test carried out on all raw...

Fueltech- PEAK & HOLD PRO HARNESS

Fueltech- PEAK & HOLD PRO INJECTOR DRIVER

FEATURES   Peak and Hold PRO Injector Driver is an advanced module designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several motor protections levels in case an injector or...

Fueltech- PEAK & HOLD 8A/2A DRIVER

FEATURES   Current control driver for low impedance injectors 4 channels Available in three current versions:8A/2A 4A/1A2A/0.5A TECHNICAL DESCRIPTION   Peak and Hold 8A/2A Controls up to 4 injectors with impedance below 1.5...

FuelTech- CDI RACING IGNITION COIL (Ea.)

The FuelTech CDI Racing Ignition Coil is made to be used with our FuelTech FTSPARK ignition module with individual coil per cylinder and also rotary applications This coil is made for Capacitive Discharge Ignition only and can not be used...

Vibrant Universal Intercooler Core

Vibrant - 12835 Intercooler Core; 20"W x 11"H x 3.5"Thick Recommended Products: 1st Choice PN: 2812, 2nd Choice PN: 13102, 3rd Choice PN: 2743, 4th Choice PN: 2803, 5th Choice PN: 1489 Vibrant Air to Air Intercoolers feature bar and plate construction...

JPC Racing - Coyote Engine secondary Flip Kit (11-17)

With the Use of this tensioner flip kit,  we are able to flip the tensioner on the Left head.  One of the coyotes design flaws is the fact that the tensioner, tensions the drive side of the chain, which allows for a lot of movement your cams...

JLT

JLT BIG AIR INTAKE FOR 2020-2021 GT500

INTAKE TUBEComputer-designed and HUGE!  We were able to design this tube to use all of the available space, the tube is 6" at the filter end and smoothly tapering down to 4.5" at the Throttle body side.  Keeping the intake tube a half-inch...

GForce Performance

GForce 2015-2026 Mustang Outlaw Axles - Pair

GForce Engineering OUTLAW Axles are a direct replacement for factory half-shafts and are designed for cars making big power and/or with serious demands on their driveline. The all new Outlaw axles have been elevated from their previous design with an...

PST- 18-24 Ford Mustang GT 10-speed Automatic 3.25″ Carbon Fiber 1-Piece Direct Fit CV Driveshaft

1. 3.25″ diameter carbon fiber construction. 2. Billet aluminum endcaps.3. 300M Chromoly spline plugs.4. High-speed precision ground CV joint with chromoly internals. Has twice the range of the previous design.5. Spicer 1350 series solid U-Joint.6...

GForce Performance

Mustang S550 (2015+) Renegade Axles with Exotic Alloy Outer Stubs

The all new GForce Engineering Renegade Axles are a direct replacement for factory half-shafts and are designed for cars with everything from mild bolt-ons to those running superchargers and turbos. The Renegade axles are leap above entry level axles...

GForce Performance

GForce 2015-2026 Mustang Renegade Axles - Pair

Upgrade the factory IRS driveline with GForce Renegade axles for S550 and S650 Mustangs. Thesecomplete axle assemblies deliver a strong, serviceable solution for modified street cars and regular drag-strip use while retaining the factory differential and...

10.0 GPM Brushless Gear Pump - Signature

Fuel injected engines:– up to 6,900 FWHP on GAS – naturally aspirated– up to 4,900 FWHP on GAS – forced air induction – up to 4,830 FWHP on E85 – naturally aspirated– up to 3,430 FWHP on E85 – forced air...

7.0 GPM Brushless Gear Pump - Signature

Supports Fuel Injected Engines:– up to 4,800 FWHP on GAS – naturally aspirated– up to 3,400 FWHP on GAS – forced air induction – up to 3,360 FWHP on E85 – naturally aspirated– up to 2,380 FWHP on E85 –...

5.0 Brushless Gear Pump – Signature

The market leader in fuel delivery systems and components, Aeromotive introduces its first brushless fuel pump series. The 5.0 Brushless Gear Pump, the flagship of Aeromotive electric fuel pumps, yields 5 gallons per minute at 13.5-V and 40-PSI.  It...

3.5 Brushless Gear Pump – Signature

The market leader in fuel delivery systems and components, Aeromotive introduces its first brushless fuel pump series. The 3.5 Brushless Gear pump provides the Pro-Series Fuel Pump performance the world has come to trust and depend on, now available with...

JPC Racing - Coyote Water Pump Bolt on Water inlet -16 ORB (Thermostat Delete)

Clean up your engine bay with this simple Billet Thermostat delete.  This will remove the the thermostat and all the factory hoses. Convert your water system to -16 AN fittings with no welding required.      Kit...