JPC Racing - Coyote Thermostat Housing AN Conversion (-16 ORB)

Converting your upper radiator hose has never been easier.    With this simple adaptor you can easily swap over to a -16 ORB style fitting and keep your factory thermostat in place     

JPC Racing Cam Sensor Block Off Kit (Each)

Block off your factory cam sensors with these Delete plugs.  Perfect use when switching to a stand alone ECU      Off Road Use only. 

JPC Racing - Coyote Head Water Fittings 12 ORB (Rear of Head)

Rear Head Fittings. By knocking out the factory freeze plugs you can easily install these water fittings to feed water in the rear of the heads on a dry deck system.        

JPC Racing Coyote water pump Heater Fitting (AN Conversion)

JPC Racing Heater Fitting made of 6061 Billet Aluminum , Finished in Anodized Black. This item is great for those wanting to switch their Heating lines to the AN style fitting.  Made In USA  *Hardware Included* 

Fueltech - BACKPRESSURE DAMPENING CANISTER

By separating the back-pressure sensor from direct connection to the exhaust manifold using the FuelTech Backpressure Canister, the sensor will be protected from heat, moisture and also has pressure spike filtering naturally built into the canister. This...

Fueltech - Pro Injector Driver (Peak and Hold)

FEATURES   Peak and Hold PRO Injector Driver is an advanced module designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several motor protections levels in case an injector or...

Flaming River

Flaming River- 2015-2020 Mustang Manual Rack & Pinion

Introducing the 2015-2020 S550 Mustang Manual Rack and Pinion! The newest addition to Manual Rack & Pinion steering is lighter than the factory Mustang power system - reducing vehicle weight by 10-15 lbs. (depending on vehicle specifications) by...

Haltech - WB2 - Dual Channel CAN O2 Wideband Controller Kit

WB2 - Dual Channel CAN O2 Wideband Controller Kit

Fueltech - FT Injector 320 Pound Per Hour Racing Injector (Ea.)

The FT Injector is available in three versions 320 lb/H (~3272 cc/min) 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and 422lb/h respectively and up to...

Competition Cams

Comp Cams- 2018+ Stage 2 Mutha' Thumpr NSR 232/242 Hydraulic Roller Cams

Stage 2 Mutha' Thumpr™ NSR 232/242 Hydraulic Roller Cams for 2018+ Ford 5.0L. Thumpr™ grind for 2018+ Coyote. This is a step up in duration for more modified vehicles and is especially good with long tube headers.   Engine Family:Ford...

AEM-X-Series Gauge Faces

AEM Electronics X-Series gauge faces help to revive the look of your dash panel. These specialized replacements are available for a wide range of instrumentation—such as fuel and oil pressure, temperature, EGT, speed, volts, boost, and more. The...

Oliver - Billet Standard Light 6.200 I Beam Rod

Rod Length: 6.200” Weight: Total :196 Rotate: 485 Recip: 681     *Approximate Weights, actual rod weight may vary Bolts: Premium 7/16” As with all Oliver...

Callies - Ultra Connecting Rods

CALLIES ULTRA CONNECTING RODS     Ultra connecting rods are made entirely in the U.S.A. Every Ultra connecting rod is produced from specially formulated Timken4330V steel. This material is then precision forged in Michigan and fully machined in...

Cometic- MLS 5.0 Gen 3 Coyote Head Gasket ( Left) .051

  Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for...

Cometic- MLS 5.0 Gen 3 Coyote Head Gasket ( Right) .051

  Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for...

Cometic- MLS 5.0 Gen 3 Coyote Head Gasket ( Right) .040

  Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for...

Cometic- MLS 5.0 Gen 3 Coyote Head Gasket ( Left) .040

  Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for...

Cometic- MLX 5.0 Gen 3 Coyote Head Gasket ( Left) .040

  Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for...

Cometic- MLX 5.0 Gen 3 Coyote Head Gasket ( Right) .040

  Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for...

Cometic- MLX 5.0 Gen 2 Coyote Head Gaskets ( Right ) .051

Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for fluids...

Cometic- MLX 5.0 Gen 2 Coyote Head Gaskets ( Right ) .040

Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for fluids...

Cometic- MLX 5.0 Gen 2 Coyote Head Gaskets ( LEFT ) .051

Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for fluids...

Cometic- MLX 5.0 Gen 2 Coyote Head Gaskets ( LEFT ) .040

Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer along with embossments provide a micro seal for fluids...

Cometic- MLS 5.0 Gen 2 Coyote Head Gaskets ( Right) .056

Same Gaskets Used on all JPC in house builds!   The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, its ability to rebound and corrosion resistance. The outer layers of the...