Low Profile IRS Subframe Bolts (PAIR)

With some of the larger tire and wheel combinations, the tire's sidewall can contact the head of the rearward IRS subframe-mounting bolt. Increased clearance for larger tires can be had with these low-profile bolts. At .350" tall, this low-profile bolt...

McLeod

McLeod- 6 bolt Modular Aluminum Flywheel

Aluminum flywheels are ideal for numerous applications. These lightweight units are generally not recommended for naturally aspirated street vehicles, but will work well in lightweight vehicles with either superchard or turbocharged engines. These...

BMR Suspension

BMR- 2010-2014 Lightweight "Adjustable"Tubular Front Control Arms,19mm

NOTE: 2010 Mustangs feature both 18mm and 19mm ball-joints. If you have a 2010 Mustang, please verify ball-joint size before placing order. Improve handling response and reduce weight in your 2010-2011 S197 Mustang with a set of Tubular A-arms from BMR...

BMR Suspension

BMR- 2010-2014 Lightweight A-arms, Non-adj, Poly/delrin, 19mm Std Ht Ball Joint

NOTE: 2010 Mustangs feature both 18mm and 19mm ball-joints. If you have a 2010 Mustang, please verify ball-joint size before placing order. Improve handling response and reduce weight in your 2010-2011 S197 Mustang with a set of Tubular A-arms from BMR...

BMR Suspension

BMR- 2005-2014 GT/GT500 Poly/Rod Adjustable Panhard Rod

Precisely locate the rear axle housing in your 2005-2012 Mustang chassis with a Poly/Rod Adjustable Panhard Rod from BMR Suspension. Manufactured from heavy wall 1.25 DOM tubing and a diameter, chrome-moly double adjuster, this panhard rod utilizes a...

JLT

JLT- Plastic Big Air Intake (11-14 5.0 W/twin screw S/C)

All new Textured Plastic BIG AIR CAI for the 2011-12 5.0 with Roush, Whipple or FRPP Supercharger kits This kit is worth 30+ RWHP over the stock closed air box that comes with your supercharger kit. (TUNING REQUIRED) When we developed our 2011 Mustang...

Stifflers

Stifflers- 2011-up Mustang Driveshaft Safety Loop

Doesn't get much simpler than this, bolts directly to the back of the transmission. Quick and easy bolt-in application requires no drilling or welding and is extremely lightweight. Loop is slotted to allow for height adjustment. Works with automatic and...

MSD

MSD- 2011-2015 5.0 Two Step Launch Controller

This MSD 2-Step launch controller connects right to your late model Ford to produce consistent launches and quicker 60-foot times by setting an rpm limit to stage with. When activated, the rpm will be held at a steady rpm and once the green light comes...

BMR Suspension

BMR- 2011-2014 Non Adjustable Upper Control Arm

Minimize rear end deflection and maintain driveline angles in your 2011 Mustang with an Upper Control Arm from BMR Suspension. Superior to the factory stamped steel control arm, this product is constructed from 1.625 DOM tubing, 3/16 CNC laser cut steel...

ARP

ARP- 2011-12 & 2018+ GT/Boss Coyote 5.0 Head Stud Kit

  ARP 8740 Alloy Cylinder Head Stud Kit for the 2011-2012 & 2018-2023 5.0 Coyote Engine.   ** Will not fit Gen 2 (13-17) Block **   Provides even clamping and loading, also can be retorqued over and over. Cold-forged to ensure...

ARP

ARP- Side Main Bolts for Boss Block

These ARP main studs are made from 8740 chromemoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come...

Moroso

Moroso- 2011-up 5.0C Oil Pan

Baffled Steel Oil Pan for FORD 5.0 "COYOTE" ENGINES Fits: Mustang, 2011-up ; Mustang 1979-2010 and other Ford Rear Sump applications   Fabricated steel with a clear zinc finish Oil pan has a thick steel rail with a 2 3/8" deep front section and a 6...

New Pilot Bearing

New replacement Pilot Bearing

MSD

MSD- Mod-Motor 2 Step Launch Controller

These MSD Launch Masters connect right to your late model Ford to produce consistent launches and quicker 60 ft. times by setting an rpm limit to stage with. When the MSD Launch Masters are activated, the rpm will be held steady. Once the green light...

McLeod

McLeod- Modular 8 Bolt Steel Flywheel ( Heavy )

The steel flywheel is perfect for street applications where easy stop light acceleration is desired and for off road or rock crawling. Steel flywheels come in various weights and and dimensions. For race applications, a heavier steel unit is ideal for...

Moroso

Moroso- 2011-2014 GT 5.0 Fabricated Aluminum Coolant Expansion Tank

Direct bolt-in replacement for 2 piece OEM plastic tank Fabricated aluminum for strength, factory tanks fail after repeated high heat situations This tank can be polished,powder coated,painted,chromed or left as is for the race look Uses factory stock...

New OEM Style Slave Cylinder

OEM Style Replacement GT/GT500 Slave Cylinder. A must for 2011 GT500's with McLeod Twin Disc Clutches

SPEC

SPEC- 8 Bolt Billet Steel Flywheel

SFI Certified 8 Bolt Machined to precise specs Billet steel Types of Driving: Street, Drag, Pulling, Autocross SPEC billet flywheels are manufactured and developed for specific driving environments and recommended based on how each car reacts to...

SPEC

SPEC- 6 Bolt Billet Steel Flywheel

SFI Certified 6 Bolt Machined to precise specs Billet steel Types of Driving: Street, Drag, Pulling, Autocross SPEC billet flywheels are manufactured and developed for specific driving environments and recommended based on how each car reacts to...

Eibach

Eibach- Sportline 2011-2014 Mustang GT Lowering Springs

Are you looking for the lowest possible street ride? These Eibach Sportline springs slam your vehicle anywhere from 1 3/4 in. to 2 1/4 in. That not only gives your ride that race car look, but it also dramatically improves your handling. These Eibach...

Moser Engineering C-Clip Eliminators for 79-04 Mustang

The 9333 C-Clip Eliminators fit Moser Engineering axles with 1.533 bearing seat. Modification required when using OEM disc brakes. The 9300 C-Clip Eliminators fit Moser Engineering C-Clip axles and OEM axles with 1.400" bearing seat. Modifications...

Moser Engineering C-Clip Style Axles

These forged steel street axles for your stock OEM application are non-tapered, with hardened & ground bearing seats and machined c-clip grooves. Our replacement c-clip axles are available in any length up to 37. If you choose to narrow your rear end...

ATI Performance Products

ATI- 2011+ 5.0 Coyote SFI 18.1 Balancer

ATI Performance Products, Inc. is proud to introduce its Super Damper for the 2011 Mustang GT with the newly released 5.0L Coyote engine. In an effort to stay ahead of the competition, ATI is the first to offer an acceptable dampening solution for this...

Camber Bolts 14mm. Front - Camber +/-1.75 Degrees Of Adjustment

After installing a spring set, your vehicle's alignment should always be checked. Once lowered, a wheel's camber may become "increasingly negative", meaning that the top of the tire is angled inward. While some "negative" camber aids in improving...