JPC Racing

JPC- Pushlock Fuel Hose -4an (10 Feet)

Construction Inner Chemivic Oil and Heat resistant synthetic rubber. RMA Class A (High Oil Resistance)   Outer Cover Black dyed textile braid (Mildew and Oil Resistant)     This is the fuel line / oil lines we use on all of our in...

JPC Racing

JPC- Tremec S197 Magnum XL Driveshaft Safety Loop

JPC Racing Tremec Magnum XL Driveshaft Safety Loop for S197 Mustangs 2005-2014   FINALLY!!!  Everyone needs one if they want to pass tech at their drag strip or if you just want that extra safety for your car.  This loop is designed to...

JPC Racing

JPC- 2011+ GT/Boss Breather Package for Roush/VMP TVS Supercharger

Only breather kit that works with the Roush/VMP TVS Kit!!!!   Eliminates Oil in the intake Cleans up engine bay All Hardware included **DO NOT OVER TIGHTEN THE CLAMPS ON THE BREATHERS. THIS CAN CAUSE DAMAGE TO THE BREATHERS**  

JPC Racing

JPC- Paxton/Vortech BOV Block Off Plate

    This plate is used to block off the Vortech Blow off valve flange when switching to a larger blow off valve. This bolts right on and re uses the gasket that comes with the kit.   Fits 2011-2014 Mustang GT/Boss Only.  ...

JPC Racing

JPC- 11-14 Mustang w/Paxton/Vortech Tial Q 50mm Race Blow Off Valve Kit

Having issues with your pipes blowing off after letting off? Looking to get a little bit more sound out of your Paxton/Vortech? JPC now offers a upgrade package for the 2011-2014 Mustang GT's equipped with a Paxton or Vortech Supercharger. This is a drop...

JPC Racing

JPC- 2011-2014 GT/Boss T bolt Upgrade kit for Paxton Superchargers

We at JPC always like to turn the "wick" up.  And doing so we always find the limitations of the basic supplied components with aftermarket systems.  This kit is a complete Stainless Steel T bolt kit specifically for the 2011-2014 Mustang...

JPC Racing

JPC- 2005-2010 Mustang GT Breather Package

Eliminates Oil in the intake Cleans up engine bay All Hardware included  

JPC Racing

JPC- 2011-up Mustang GT Fuel Drain Kit

Ever tried to drain the fuel out of your 2011+ Mustang GT? Give it a try and you'll find that it's nearly impossible to do. With the JPC Fuel drain kit you can drain the fuel quickly and easily allowing you to switch fuels in a matter of...

JPC Racing

JPC- 96-04 Mustang Brake Fitting to -3an Flare ( pair )

Metric to -3an Flare. Made from durable steel and machined to precise aerospace tolerances, these brake system adapter fittings are perfect for all of your plumbing needs.

JPC Racing

JPC- Injector Dynamics ID1050-XDS / BAP Package

This package deal is great for anyone making up to 700rwhp with their 2011+ Mustang. Included are a set of ID1050-XDS Injectors and a Maxflow BAP by Vortech.   Are you looking for the absolute best injectors you can buy? Whether a tuner, or an end...

JPC Racing

JPC- Custom Fabricated Paxton/Vortech/Procharger Reservoir 11-14 GT ****Backordered****

As many of you know the reservoir that's included in the kit tends to leak at the top leaving splatter all over your freshly cleaned valve covers and strut tower. In some cases the reservoir that included with the kit will crack open. Also...

JPC Racing

JPC- 2011+ GT/Boss Breather Package

Eliminates Oil in the intake Cleans up engine bay All Hardware included   DO NOT OVER TIGHTEN THE CLAMP.  THERE IS NO WARRANTY IF RUBBER IS CUT IN CLAMP AREA       

JPC Racing

JPC- 2010-2014 Mustang GT/GT500/Boss Line Lock Kit

*****CLICK OVER TO THE VIDEO TAB FOR A VIDEO INSTALLATION GUIDE*****   This is the only kit on the market that will bolt-on to your 2010 and 2011-2014 Mustang GT/GT500/Boss. System will fit any brake system Polished Stainless Steel 8mm...

JPC Racing

JPC- DOT Braided Stainless Steel Brake Line & Ford Adaptor Fitting Kit -3an

Complete kit to adapter front race brakes to OEM hard line on 2005-up Mustangs Kit includes: (2) DOT Approved "Smoke" Color Covered -3an Braided Stainless Steel Flexible Brake Hoses (2) OEM Hard line connect to -3an flare brake fittings 

JPC Racing

JPC- 94-up Mustang Brake Fitting to -3an Flare ( pair )

Metric to -3an Flare. Made from durable steel and machined to precise aerospace tolerances, these brake system adapter fittings are perfect for all of your plumbing needs.

JPC Racing

JPC- Oil Filter Sandwich Adaptor for Modular Oil Pressure Gauge

Oil filter sandwich adapter offers one of the easiest ways to install your oil temperature or oil pressure sender for a quick and smooth installation of your gauge. Each oil filter adapter plate allows you to mount oil sensors and feed lines without the...

Strange

Strange- 2005-up Mustang Pro Race Steel Front Brake Kit (Factory Hubs)

These Strange Pro Race steel front brake kits offer a tremendous weight savings over OEM brake components. The entire 4-piston brake kits, complete with bearings, hubs, rotors, pads, calipers, etc., weigh only 33.5 lbs. They are unsurpassed in detail, as...

JPC Racing

JPC- 2005-2014 GT/GT500/Boss Black Clutch Line Upgrade

GET THE NEWLY UPDATED BLACK SYSTEM FOR THE OE HIDDEN LOOK!  IN STOCK AND READY TO SHIP!   GET THE ACTUAL ORIGINAL!!!! Don't let the competition fool you with their copies.  The JPC Clutch line upgrade was brought to the market over 10...

Strange

Strange- 2005-14 Mustang Pro Race Steel Front Brake Kit (Strange Hub)

These Strange Pro Race steel front brake kits offer a tremendous weight savings over OEM brake components. The entire 4-piston brake kits, complete with bearings, hubs, rotors, pads, calipers, etc., weigh only 33.5 lbs. They are unsurpassed in detail, as...

Viking

Viking- 2015+ Mustang Double Adjustable Shock Package

Viking's new double adjustable shocks for the 2015+ Mustangs are some of the best shocks available. These shocks allow more then 360 different shock arrangements for anyone looking to dial in the suspension on these new IRS equipped cars.   Vikings...

RGR 2018+ Gen3 Coyote Cam Lockout Kit * Back Ordered

The RGR cam lockout kit for the 2018+ Gen3 Coyote engine are one of the most durable and precise cam lockout kits available. These are the only cam lockout kit on the market that allows the gear to be centered into the camshaft. These gears allow for...

RGR 2015-2017 Coyote Cam Lockout Kit *Back Ordered

The RGR cam lockout kit for the 2015-2017 Coyote engine are one of the most durable and precise cam lockout kits available. These are the only cam lockout kit on the market that allows the gear to be centered into the camshaft. These gears allow for full...

RGR 2011-2014 Coyote Cam Lockout Kit *Back Ordered

The RGR cam lockout kit for the 2011-2014 Coyote engine are one of the most durable and precise cam lockout kits available. These are the only cam lockout kit on the market that allows the gear to be centered into the camshaft. These gears allow for full...

Afco

AFCO-2005-2014 Big Gun Front Strut Double Adjustable

The AFCO double adjustable strut has been designed to exceed the need in the drag market. In most applications and classes, controlling weight transfer is key to making successful passes. Racers and chassis builders across the market requested a strut...