null
phone: 410-729-0005
14 of 14 Items
  • ARP- Coyote Balancer Bolt

    ARP- Coyote Balancer Bolt

    As the crankshaft flexes, the damper absorbs incredible amounts of energy. These damper bolt kits from ARP will ensure that your balancer is locked into position. They feature a 1/4 in. thick wide-area washer and an extra-tall, 12-point head that accepts...

    $42.98
  • RGR Engines - Gen 3 Lockout Exhaust ONLY

    RGR Engines - Gen 3 Lockout Exhaust ONLY

    This exhaust only lockout kit provides the necessary pieces to lockout the EXHAUST CAM ONLY on both banks including the mounting hardware to attach them to the phasers and cams. Please consult with your tuner for degree positioning based on your...

    $325.00
  • RGR Engines - Gen 2 Lockout Exhaust ONLY

    RGR Engines - Gen 2 Lockout Exhaust ONLY

    This exhaust only lockout kit provides the necessary pieces to lockout the EXHAUST CAM ONLY on both banks including the mounting hardware to attach them to the phasers and cams. Please consult with your tuner for degree positioning based on your...

    $300.00
  • RGR Engines - Gen 1 Lockout Exhaust ONLY

    RGR Engines - Gen 1 Lockout Exhaust ONLY

    This exhaust only lockout kit provides the necessary pieces to lockout the EXHAUST CAM ONLY on both banks including the mounting hardware to attach them to the phasers and cams. Please consult with your tuner for degree positioning based on your...

    $275.00
  • HPL - 5W30 Synthetic Break-In Oil Quart

    HPL - 5W30 Synthetic Break-In Oil Quart

    Maximum camshaft, lifter, push rods tip and bearings protection, perfect for flat tappet cams. Ideal balance of key additives allows the rings to seat without compromising other critical engine components. Superior protection at startup and low oil...

    $11.95
  • Procharger Coyote Crank Support

    Procharger Coyote Crank Support

    Is the crank support absolutely mandatory? Not really, but consider it cheap insurance with the Coyote engine, just like billet oil pump gears.  More boost and rpm mean more load on the crank snout—in high boost/high-horsepower...

    $769.99
  • Accufab- Race Head Stud Kit 4.6 / 5.4 / 5.8 / Coyote Accufab- Race Head Stud Kit 4.6 / 5.4 / 5.8 / Coyote

    Accufab- Race Head Stud Kit 4.6 / 5.4 / 5.8 / Coyote

    These 9/16" to 1/2" custom head studs were originally designed for use in Top Fuel.  They are much larger than the commonly used 11mm head studs and requires the block to be tapped to 9/16-12. Torque can be increased up to 125 ft lbs. Cylinder...

    $699.99
  • ARP- Coyote RH Cam Phaser Bolt Kit (set of 24)

    ARP- Coyote RH Cam Phaser Bolt Kit (set of 24)

    These high-quality ARP cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. These cam bolts have a reduced head size that makes installation...

    $78.99
  • ARP- Coyote 12pt. Cam Tower Bolt Kit

    ARP- Coyote 12pt. Cam Tower Bolt Kit

    Camshaft positioning is especially critical on overhead cam engines, and ARP camshaft tower stud and bolt kits make sure that cam towers are properly secured. ARP's durable bolts and studs are made from 8740 chromoly steel, with all of the threads rolled...

    $129.99
  • ARP- 2013-2017 Coyote Head Stud Kit

    ARP- 2013-2017 Coyote Head Stud Kit

    *** CURRENTLY ON BACK ORDER ***   These Pro series studs from ARP are cold-forged to ensure molecular integrity. They are heat-treated prior to thread rolling and machining and are rated at a whopping 190,000 psi. The Pro series kits are also...

    $355.00
  •  ARP- 2011-2023 Coyote Main Stud Kit

    ARP- 2011-2023 Coyote Main Stud Kit

    These ARP main studs are made from 8740 chromoly steel and have a 190,000 psi tensile-strength rating. They are precision centerless-ground and thread-rolled to Mil-S-8879 specs, with a black oxide finish for corrosion resistance. The kits come complete...

    $299.94
  • ARP- PRO Series Modular Flexplate Bolt Kit Set of 8

    ARP- PRO Series Modular Flexplate Bolt Kit Set of 8

    These bolts are the recommended part for any Ford Modular 8 bolt crankshaft upgrade or if you want to strengthen your 6 bolt unit these will work also.   These Pro series flywheel bolt kits from ARP give you all that you need to bolt in your...

    $53.99
14 of 14 Items