null
phone: 410-729-0005

Fuel Injector Clinic

FIC- 650cc Injector Set for Mustang GT ('86-'17) (High-Z)

$683.00
No reviews yet Write a Review
SKU:
IS403-0650H
Shipping:
Calculated at Checkout

Mustang GT '86-'15 Fuel Injector Clinic Injector Set: 8 x 650 cc Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Drop-in for size and plug* OE, with supercharger kit removal of extender may be necessary. *Pre 2005 cars may need pigtails PGTUSC8 or add Plug &Play adaptors PADPUtoJ8 650cc/min (62lb/hr) @ 43.5 psi, 615cc/min (59lb/hr) @ 39 psi

Fuel Injector Clinic injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. Dynamic flow matching is used only on injector sets where the additional time and cost are justified by the corresponding benefits gained during the tuning process.

Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid.

The superior spray pattern and atomization make these injectors easy to tune and provide great drivability.

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. For aftermarket or other unusual setups please contact us prior to placing your order to make sure you receive injectors that fit properly.

Every injector is covered against failure caused by defects in original manufacture by our 12 month warranty.

Fuel Injector Clinic injectors use the factory electrical connector or include solder-in pigtails. You can purchase adaptor ‘plug-n-play’ harnesses to avoid cutting your stock harness as an optional extra.

This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle’s OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.