FuelTech

FuelTech Indutech Mechanical Fuel Pump 13GPM

The Indutech Mechanical Hex Drive Fuel Pump 13GPM is engineered to deliver up to 13 gallons per minute (GPM) and is rated at 4,000 RPM pump speed. The fuel pump is compatible with gasoline, ethanol,...

FuelTech

FuelTech FT Fuel Filter 60-Micron Steel Mesh Replacement Element

Keep your FT Filter performing like new with the factory-spec replacement mesh element. This is the OEM replacement 60-micron steel mesh element for the FuelTech FT Fuel Filter. Designed as a direct...

FuelTech

FuelTech Nippon Denso Injector Connector Kit

Use this kit when building a custom harness while using injectors with Nippon Denso connectors. Kit Includes: Nippon Denso injector connector, (2) terminals, (2) seals.

FuelTech

FuelTech FT Injector 230 lb/h GEN 3

The FT Injector 230lb/hr is a high impedance fuel injector from the FT Injector family, no Peak and Hold driver is required. The FT Injector is compatible with all available fuels (gasoline,...

FuelTech

FuelTech Indutech Mechanical Fuel Pump 20GPM

The Indutech Mechanical Hex Drive Fuel Pump 20GPM is engineered to deliver up to 20 gallons per minute (GPM) and rated at 4,000 RPM pump speed. The fuel pump is compatible with gasoline, ethanol, or...

FuelTech

FuelTech FT Injector 175 lb/h GEN 3

Aeromotive

Aeromotive Electric Water Pump Ford Coyote

Key Features: Direct mount for late model 5.0L Ford Coyote engines 50 GPM free flow rate at 13.5 V - higher flow rates at higher pressures than similarly sized competitors Lightweight billet...

10.0 GPM Brushless Gear Pump - Signature

Fuel injected engines:– up to 6,900 FWHP on GAS – naturally aspirated– up to 4,900 FWHP on GAS – forced air induction – up to 4,830 FWHP on E85 – naturally aspirated– up to 3,430 FWHP on E85 – forced...

7.0 GPM Brushless Gear Pump - Signature

Supports Fuel Injected Engines:– up to 4,800 FWHP on GAS – naturally aspirated– up to 3,400 FWHP on GAS – forced air induction – up to 3,360 FWHP on E85 – naturally aspirated– up to 2,380 FWHP on...

5.0 Brushless Gear Pump – Signature

The market leader in fuel delivery systems and components, Aeromotive introduces its first brushless fuel pump series. The 5.0 Brushless Gear Pump, the flagship of Aeromotive electric fuel pumps,...

3.5 Brushless Gear Pump – Signature

The market leader in fuel delivery systems and components, Aeromotive introduces its first brushless fuel pump series. The 3.5 Brushless Gear pump provides the Pro-Series Fuel Pump performance the...

Fueltech - Pro Injector Driver (Peak and Hold)

FEATURES   Peak and Hold PRO Injector Driver is an advanced module designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several...

Fueltech - FT Injector 320 Pound Per Hour Racing Injector (Ea.)

The FT Injector is available in three versions 320 lb/H (~3272 cc/min) 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure...

Weldon - Fuel Pump 2345-A

Fuel Injected Engines: 2800 HP @ 50 PSI @ 16 volts (Naturally Aspirated) 2400 HP at 80 PSI @ 16 volts (Boosted) Precise, consistent fuel delivery Self priming Pump element is 100% tool steel Body...

Holley

Holley - VR2 BRUSHLESS FUEL PUMP W/CONTROLLER-SINGLE 16AN INLET

Holley set the bar in 2011 with the release of the HP and Dominator in-line fuel pumps. In 2015, Holley has raised the bar again with the introduction of the VR1 and VR2 Brushless in-line fuel pumps...

Holley

Holley - 160 GPH DOMINATOR IN-LINE BILLET FUEL PUMP

Need to feed some serious horsepower? Have a nitrous or forced induction powerplant that also sees street duty? Holley's Dominator™ in-line fuel pumps are the answer! The patent pending twin pump...

Holley

Holley - 200 GPH DOMINATOR IN-LINE BILLET FUEL PUMP

Carb or EFI Applications Supports up to 1800 EFI or 2100 Carb HP Compatible with Pump Gas*, Race Gas, Diesel or E85   Need to feed some serious horsepower? Have a nitrous or forced induction...

Fueltech - FT Injector 720 Pound Per Hour Racing Injector (Ea.)

The FT Injector is available in two versions of 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and...

Fueltech - FT Injector 520 Pound Per Hour Racing Injector

The FT Injector is available in two versions of 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and...

JPC Racing

JPC- Mechanical Fuel Pressure Gauge 1-100psi

Fluid filled mechanical fuel pressure gauge for EFI fuel systems 0-100 psi 1.5" Diameter 1/8 NPT Male

Fore Innovations

Fore- 88mm Inline Fuel Filter

Standard length inline fuel filter Use after fuel pumps and before injectors Optional e

Fore Innovations

Fore- F2i Fuel Pressure Regulator

Dual Pressure PortsCeramic/Stainless valveFKM/Nomex Composite DiaphragmFluoropolymer Coated SpringLifetime warranty - Compatible with all fuel types FITMENT: Universal, any vehicle with a return...

Injector Dynamics

Injector Dynamics- "ID2600-XDS" Fuel Injectors (COYOTE Mustang)

Basic Specifications Nominal Flow Rate – 2600cc/min @ 3.0 Bar (43.5 psi)Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi) – Requires Minimum 11volt.Fuel Compatibility – Compatible with...

Fore Innovations

Fore- F2i Pressure Regulator

Dual Pressure