Fueltech - BACKPRESSURE DAMPENING CANISTER

By separating the back-pressure sensor from direct connection to the exhaust manifold using the FuelTech Backpressure Canister, the sensor will be protected from heat, moisture and also has pressure...

Fueltech - Pro Injector Driver (Peak and Hold)

FEATURES   Peak and Hold PRO Injector Driver is an advanced module designed to control low impedance injectors at a professional level, featuring 8 channels, 26-way automotive connector and several...

Fueltech - FT Injector 720 Pound Per Hour Racing Injector (Ea.)

The FT Injector is available in two versions of 520 lb/h (~5,000cc/min) and 720 lb/h (~7,000cc/min) at 90psi base fuel pressure. Can be used as low as 30psi base fuel pressure flowing 301lb/h and...

Fueltech - Smartcoil Harness Pro 550 / FT600 FORD V8

The FuelTech PRO550/600 Smart Coil harness is a true plug and play expansion to complement both the PRO550 and PRO600 V8 harness. With this expansion harness the user can make the change to multi...

Fueltech - Smartcoil (Each)

FuelTech's IGN1A inductive Smart Coils are the perfect ignition coil for your high performance application, With up to 175mj of energy and a long spark discharge time of 3.2ms. These coils provide...

Fueltech - Wideband Nano WB-o2

Wideband O2 sensor display and conditioner for Bosch LSU 4.2 sensors.

Fueltech - PEAK & HOLD 8A/2A DRIVER w/ Harness

Peak and Hold 8A/2A Controls up to 4 injectors with impedance below 1.5 ohm 16 Bosch 160lb/h (1600cc) injectors (4 per channel) 8 Siemens low impedance injectors (2 per channel) 4 MSD low...

FuelTech

FuelTech- Dashboard insert Panel for FT600

FuelTech Dashboard insert Panel for FT600 ***Modifications are required to fit specific vehicle. Panels do not come trimmed down or with a carbon fiber decal.