null
phone: 410-729-0005
  • Trick Flow Adjustable Crank Sprockets (2v / 4v)

    Trick Flow Adjustable Crank Sprockets (2v / 4v)

    In the event that you have to replace the crank sprockets on your Trick Flow® Modular timing chain and gear set, we have you covered. These crank sprockets are machined from billet steel for durability. These crank sprockets are also adjustable for...

    $69.97
  • JPC- Custom NA Coyote Camshafts  "2015-2017"

    JPC- Custom NA Coyote Camshafts "2015-2017"

    Custom JPC NA Cams      Even with the incredible power these cams are very streetable and have great driving characteristics.     Basic Operating RPM Range: 3500-8500 Valve Springs Required: Yes  Lock outs...

    $1,999.00
  • K1- H-Beam Billet Rods 5.933 4.6 And Coyote

    K1- H-Beam Billet Rods 5.933 4.6 And Coyote

    The New K1 Technologies Forged 4340 H-Beam Connecting Rods are the absolute strongest H-Beam Rods available for the Ford 4.6L and 5.0L Coyote Modular Engines. Unlike other H-Beams on the market, these K1 H-Beam Rods feature 7/16" ARP 2000 Rod Bolts. The...

    $769.00
  • COMP CAMS- Coyote Engine Degree Kit

    COMP CAMS- Coyote Engine Degree Kit

    Camshaft Degree Kits Cylinder Heads On Engine   Ford 5.0L 4V Coyote Camshaft Degree Kits give you all the tools necessary to set proper timing with the stock camshafts or aftermarket performance cams. Degreeing positions the camshaft for the...

    $246.95
  • PAC Racing- Coyote Drop-in Valve Spring Kit

    PAC Racing- Coyote Drop-in Valve Spring Kit

    Number of Springs Per Valve:Single Outside Diameter of Outer Spring (in):1.020 in. Coil Bind Height (in):0.940 in. Damper Spring Included:No Spring Rate (lbs/in):240 lbs./in. Valve Spring Style:Beehive Valve Springs...

    $644.00
  • Diamond- MOD2K Trick Flow 2V -9.5cc

    Diamond- MOD2K Trick Flow 2V -9.5cc

    Piston Features: 3D milling on piston crowns for ready to install finish Inboard forging design with fully machined under crown for maximum strength Valve pockets designed to work with Trick Flow T/W 2V cylinder heads Side gas ports for better ring...

    $1,175.00
  • Diamond- 4v Modular Pistons -7.5cc Dish

    Diamond- 4v Modular Pistons -7.5cc Dish

    MOD 4V   Piston Features: Designed to be used with DOHC cylinder heads 3D milling on piston crowns for ready to install finish Offset pins for quiet operation Moly skirt coating for friction loss and skirt wear protection Top ring down...

    $841.00
  • Accufab- Race Head Stud Kit 4.6 / 5.4 / 5.8 / Coyote Accufab- Race Head Stud Kit 4.6 / 5.4 / 5.8 / Coyote

    Accufab- Race Head Stud Kit 4.6 / 5.4 / 5.8 / Coyote

    These 9/16" to 1/2" custom head studs were originally designed for use in Top Fuel.  They are much larger than the commonly used 11mm head studs and requires the block to be tapped to 9/16-12. Torque can be increased up to 125 ft lbs. Cylinder...

    $699.99
  • Clevite- H Series Rod Bearings Set of 8  -.010 Oversize

    Clevite- H Series Rod Bearings Set of 8 -.010 Oversize

    The Clevite H-Series Rod Bearings for the Ford 4.6L / 5.4L are an excellent choice for all High Performance Builds. We use them in practically every engine we build. Suggested for use will all Forged Crankshafts, Forced Induction Applications or any...

    $191.92
  • ARP- Coyote RH Cam Phaser Bolt Kit (set of 24)

    ARP- Coyote RH Cam Phaser Bolt Kit (set of 24)

    These high-quality ARP cam bolts have increased preload clamping force to ensure positive timing gear register. Their increased material strength overcomes valvetrain harmonics and stress. These cam bolts have a reduced head size that makes installation...

    $78.99
  • ARP- Coyote 12pt. Cam Tower Bolt Kit

    ARP- Coyote 12pt. Cam Tower Bolt Kit

    Camshaft positioning is especially critical on overhead cam engines, and ARP camshaft tower stud and bolt kits make sure that cam towers are properly secured. ARP's durable bolts and studs are made from 8740 chromoly steel, with all of the threads rolled...

    $129.99
  • Clevite- H Series Rod Bearings Set of 8  Standard

    Clevite- H Series Rod Bearings Set of 8 Standard

    The Clevite H-Series Rod Bearings for the Ford 4.6L / 5.4L are an excellent choice for all High Performance Builds. We use them in practically every engine we build. Suggested for use will all Forged Crankshafts, Forced Induction Applications or any...

    $159.92
  • Oliver- Billet Standard Light 5.933 I Beam Rod

    Oliver- Billet Standard Light 5.933 I Beam Rod

    BILLET ULTRA LIGHT RODS WITH 3/8" BOLTS Oliver I-beam connecting rods feature exclusive "Parabolic Beam" designs that reduce beam stress and deliver the highest strength-to-weight ratio of any connecting rod currently made. All rods are precision...

    $1,450.33
  • Oliver- Billet Ultra Light 5.933 I Beam Rod

    Oliver- Billet Ultra Light 5.933 I Beam Rod

      BILLET ULTRA LIGHT RODS WITH 3/8" BOLTSOliver I-beam connecting rods feature exclusive "Parabolic Beam" designs that reduce beam stress and deliver the highest strength-to-weight ratio of any connecting rod currently...

    $1,450.33