Project 24 - Justin's Performance Center

JPC- 2011+ GT/Boss Breather Package

MSRP:

Was:

Now: $59.99

Add to Cart
JPC- 2010-2024 Mustang Chromoly Lightweight Front Bumper Support

MSRP:

Was:

Now: $185.00

Add to Cart
Sale

JPC- 2010-2024 Mustang Front & Rear Lightweight Bumper Support Package

MSRP:

Was: $374.50

Now: $349.99

Add to Cart
Whipple Supercharger - 2024 Mustang Supercharger Kit

MSRP:

Was:

Now: $9,295.99

Choose Options
TBM Brakes -2024 Ford Mustang S650 Medium Duty Drag Racing Front Brake Kit (Reusing Factory Hubs)

MSRP:

Was:

Now: $1,599.00

Add to Cart
TBM Brakes - 2024 Ford Mustang S650 Rear Drag Racing Brake Kit (Reusing Factory Hubs)

MSRP:

Was:

Now: $1,599.00

Add to Cart
Protorque - X10 10R80 Torque Converter

MSRP:

Was:

Now: $2,000.00

Choose Options
Nitrous Express - Bottle Pressure Gauge

MSRP:

Was:

Now: $40.49

Add to Cart
Nitrous Express - Maximizer 6 Progressive Controller

MSRP:

Was:

Now: $617.27

Add to Cart
Nitrous Express - Direct Port Plate System For Coyote Engine w/10lb bottle

MSRP:

Was:

Now: $1,667.05

Add to Cart
LTH - 2024 Mustang GT Long Tube Headers

MSRP:

Was:

Now: $1,592.64

Choose Options
Weld- Belmont Beadlock 17x10

MSRP:

Was:

Now: $750.00

Add to Cart
Weld- Full Throttle Frontrunner 17x4.5

MSRP:

Was:

Now: $934.60

Add to Cart
PST- 18-24 Ford Mustang GT 10-speed Automatic 3.25″ Carbon Fiber 1-Piece Direct Fit CV Driveshaft

MSRP:

Was:

Now: $1,559.98

Add to Cart
Kelltrac - S550 Mustang IRS Subframe "Posi-Loc" System

MSRP:

Was:

Now: $199.99

Add to Cart
DSS- 2015+ Mustang 2000HP Rated Pro-Level Axles

MSRP:

Was:

Now: $2,192.96

Add to Cart
JPC- 2015-up Mustang S550/S650 Line Lock Kit w/ Stainless Steel Brake Line Upgrade

MSRP:

Was:

Now: $346.00

Choose Options
JPC- 2010-2024 Mustang Chromoly Lightweight Rear Bumper Support

MSRP:

Was:

Now: $210.00

Add to Cart

JPC- 2011+ GT/Boss Breather Package

Eliminates Oil in the intake Cleans up engine bay All Hardware included DO NOT OVER TIGHTEN THE CLAMP. THERE IS NO WARRANTY IF RUBBER IS CUT IN CLAMP AREA *****Available in Black***** https://www.jpcracing...

MSRP:

Was:

Now: $59.99

Add to Cart
JPC- 2010-2024 Mustang Chromoly Lightweight Front Bumper Support

Custom made lightweight chromoly front bumper support. THIS WILL FIT HELLION UPGRADED 6 INCH INTERCOOLER ONLY WEIGHTS 2lbs 8oz. / Stock bumper is 13lbs This allows you to get rid of your factory bumper and keep your front clip from moving...

MSRP:

Was:

Now: $185.00

Add to Cart
Sale

JPC- 2010-2024 Mustang Front & Rear Lightweight Bumper Support Package

Custom made lightweight chromoly front & rear bumper support kit. Front weighs in at 2lbs 8oz. / Stock front bumper is 13lbs Rear weighs in at 2lbs 10oz. / Stock rear bumper is almost 16lbs TOTAL WEIGHT SAVINGS OF ALMOST 24lbs!! This allows you...

MSRP:

Was: $374.50

Now: $349.99

Add to Cart
Whipple Supercharger - 2024 Mustang Supercharger Kit

Elevate Your Mustang Experience: The 2024 Ford Mustang, equipped with the revolutionary Whipple Gen 6 3.0L supercharger, becomes an unrivaled performance titan. Experience the thrill of 810HP in Stage 1 and an astounding 855HP in Stage 2, each...

MSRP:

Was:

Now: $9,295.99

Choose Options
TBM Brakes -2024 Ford Mustang S650 Medium Duty Drag Racing Front Brake Kit (Reusing Factory Hubs)

Description This kit fits the following: 2024 Ford Mustang (reusing factory hubs) medium duty Weight: 23 lbs Kit includes: F3 4 piston calipers 002-0192SSP #1 compound low temp track pads 6-0102W 11.75 x .500” thermally...

MSRP:

Was:

Now: $1,599.00

Add to Cart
TBM Brakes - 2024 Ford Mustang S650 Rear Drag Racing Brake Kit (Reusing Factory Hubs)

15-22 Ford Mustang S650 Rear Drag Racing Brake Kit (Reusing Factory Hubs) Note: This Kit retains usage of factory ABS functionality Note: This Kit requires usage of an included drill fixture to drill and tap holes in factory spindles for...

MSRP:

Was:

Now: $1,599.00

Add to Cart
Protorque - X10 10R80 Torque Converter

The right torque converter can unlock a sizeable amount of performance out of any vehicle. If you’re going to upgrade the torque converter in your modern muscle car, you need to make sure it will meet the transmission’s needs...

MSRP:

Was:

Now: $2,000.00

Choose Options
Nitrous Express - Bottle Pressure Gauge

Consistency is key when going fast and the Nitrous Express Pressure Gauge makes sure you are doing just that! This high accuracy liquid filled 2-1/16" nitrous pressure gauge reads from 0 to 1500 psi.

MSRP:

Was:

Now: $40.49

Add to Cart
Nitrous Express - Maximizer 6 Progressive Controller

The Maximizer 6 features many safety features that help you push your tune-up further while protecting your engine from damage. The Maximizer 6 progressive nitrous controller operates up to four separate stages of nitrous based on either time, RPM, MPH,...

MSRP:

Was:

Now: $617.27

Add to Cart
Nitrous Express - Direct Port Plate System For Coyote Engine w/10lb bottle

The Nitrous Express direct port nitrous plates are designed to fit factory 2018+ 5.0L Intake manifolds or the Boss intake manifolds. The 2018+ manifolds are a direct bolt on replacement for any of your modern 5.0 coyote engines and provide cheap, easy...

MSRP:

Was:

Now: $1,667.05

Add to Cart
LTH - 2024 Mustang GT Long Tube Headers

The stock unit is manufactured with the goal of suppressing the motors sound as much as possible. This sound deadening robs the motor of vital flow and horsepower. Take your horsepower back with the LTH Long Tube Headers for your S650 Mustang!! Will...

MSRP:

Was:

Now: $1,592.64

Choose Options
Weld- Belmont Beadlock 17x10

Gloss Black The Belmont Beadlock is designed for pure on track performance featuring a 6061 forged beadlock ring with Heli-Coil® thread inserts. Its innovative monoblock construction using our Rotary Formed technology guarantees rigidity and...

MSRP:

Was:

Now: $750.00

Add to Cart
Weld- Full Throttle Frontrunner 17x4.5

The WELD Racing Full Throttle 82 Series Black Wheels are a modern take on the classic Torq Thrust style. This new design features forged one-piece construction that is 15.2 SFI rated. Optimized for weight reduction Black anodized or polished...

MSRP:

Was:

Now: $934.60

Add to Cart
PST- 18-24 Ford Mustang GT 10-speed Automatic 3.25″ Carbon Fiber 1-Piece Direct Fit CV Driveshaft

1. 3.25″ diameter carbon fiber construction. 2. Billet aluminum endcaps.3. 300M Chromoly spline plugs.4. High-speed precision ground CV joint with chromoly internals. Has twice the range of the previous design.5. Spicer 1350 series solid U-Joint.6...

MSRP:

Was:

Now: $1,559.98

Add to Cart
Kelltrac - S550 Mustang IRS Subframe "Posi-Loc" System

This KellTrac S550 Mustang IRS Subframe "Posi-Loc" System for the S550 Mustang positively locates the rear IRS Subframe within the chassis. By filling the voids within the factory bushings and putting positive pressure on the factory bushing...

MSRP:

Was:

Now: $199.99

Add to Cart
DSS- 2015+ Mustang 2000HP Rated Pro-Level Axles

Approximately 4-5 weeks build time. This can vary Introducing the new 2015+ Mustang 2000HP Rated Pro-Level Axles from The Driveshaft Shop.The new Pro-Level axles are a complete redesign with the intention to not only increase strength, but...

MSRP:

Was:

Now: $2,192.96

Add to Cart
JPC- 2015-up Mustang S550/S650 Line Lock Kit w/ Stainless Steel Brake Line Upgrade

The JPC S550 line lock kit is now available from JPCRACING! This kit is the only line lock kit available for the 2015+ Ford Mustang. Many of our customers know that the factory line lock kit is fairly clumsy to use, you have a lot of screens to go...

MSRP:

Was:

Now: $346.00

Choose Options
JPC- 2010-2024 Mustang Chromoly Lightweight Rear Bumper Support

Custom made lightweight chromoly rear bumper support. ONLY WEIGHTS 2lbs 4oz. / Stock Rear Bumper is almost 16lbs!! This allows you to get rid of your factory bumper and keep you rear bumper from moving around. Great lightweight addition. ** For off...

MSRP:

Was:

Now: $210.00

Add to Cart