JPC Racing

JPC- S550 Hurst Shifter Mount (backorder)

Looking for an easier way to put a Hurst shifter in your 2015+ Mustang? This shifter mount allows you to maintain your factory center console, while being able to upgrade to a Powerglide or TH400...

AEM

AEM- X-Series Gauge Oil/Trans/Water Temp 300F/150C

AEM Electronics X-Series temperature gauges are must-haves for highly accurate oil, water, and transmission temperature readouts in your high performance vehicle. X-Series digital gauges include new...

JPC - S197 4" Aluminum TH400 Driveshaft w/ Strange Billet Yoke

Approximately 2 weeks to build and ship.  Lead times can vary  . Shaft is a 4" aluminum shaft with a billet 1350 flange and a 1350 u-joint to work with an 8.8" Rear End w/1350 pinion yoke Supplied is...

Steeda

Steeda- Tri-Ax Race Short Throw Shifter

The latest Tri-Ax shifters from Steeda Autosports are expressly designed for the Ford Mustang. They feature a style that is reminiscent of the venerable "top loaders" of the past, yet they...

Hurst

Hurst- Competition/Plus Shifter with Classic White Ball

The 2015-2017 Mustang not only looks great, but now handles even better. It is just as appropriate that the Hurst Competition Plus Short Shifter for the 2015-2017 Mustang functions even better as...

JPC Racing

Replacement Magnum XL Mount

Replacement Rubber Transmission Mount for Tremec Magnum XL Kit.   Same as supplied with kit.

Reid

Reid- TH400 SFI Case

The Turbo 400 is the favored 3-speed transmission today for high horsepower applications because of its light weight, minimal drag, and its tolerance of abuse.  As rugged as it is, there is one...

Moroso

Moroso- Powerglide Aluminum Transmission Pan

  Depth: Stock     Moroso has turned its attention to the design and manufacturing of premium-quality transmission pans. Moroso transmission pans are fabricated entirely from lightweight aluminum and...

Moroso

Moroso- Powerglide Aluminum Deep Transmission Pan

1.5 Quart capacity increase over stock depth  Depth: 3 inches      Moroso has turned its attention to the design and manufacturing of premium-quality transmission pans. Moroso transmission pans are...

Reid

REID- Roller Tail Housing for Superglide Case "Roller Bearing"

The Reid Racing, Inc. tailshaft housings are designed to fit both the REID Superglide and the stock GM Powerglide transmissions. 5 times stronger than stock, yet weighs only 4-1/2 pounds Bolt in...

Reid

REID- Coyote/ Mod Motor Bell Housing for Superglide / TH400

Modular/Coyote Ford bellhousing for the Reid Racing 2-piece Superglide and Super Hydra 400® case fits 4.6, 5.4, and 6.8 liter overhead cam engines, as well as the new generation of "Coyote" 5-liter...

Reid

REID- 2 Piece Superglide SFI Case

Reid Racing's 2-piece Superglide transmission case allows use behind all popular engine combinations. Starting with the time proven 1-piece Superglide, Reid Racing engineers decided against the "cut...

JPC Racing

SFI 8-bolt Modular 4.6/5.4/5.0 Flex plate Powerglide

This flexplate will fit all 8 bolt modular engines. 2v/3v/4v Modular and Coyote engines with a Powerglide Transmission  Some converters do have different bolt patterns and mounting holes may need to...

JPC Racing

JPC- 2005-2014 Mustang GT/Boss/GT500 Tremec Magnum XL -4an Clutch Line Upgrade

GET THE BLACK SYSTEM FOR THE OE HIDDEN LOOK!  IN STOCK AND READY TO SHIP!  

SPEC

SPEC- Aluminum Flywheel 96-10 Mustang 6 bolt

Types of Driving: Street, Drag, Pulling, Autocross SPEC billet flywheels are manufactured and developed for specific driving environments and recommended based on how each car reacts to changes in...

Performance Automatic

JPC- Pilot Bearing adapter for SBF/Mod to GM

For use on a GM Torque Converter when using it on a Mod motor or SBF engine.

Lokar

Lokar- Dip Stick - 4R70W

Lokar's Hi-Tech flexible braided stainless transmission dipsticks match right up with other Lokar accessories. They feature a flexible, heat-resistant PTFE rod with a braided stainless steel cover...

JPC Racing

JPC- Tremec S197 Magnum XL Driveshaft Safety Loop

JPC Racing Tremec Magnum XL Driveshaft Safety Loop for S197 Mustangs 2005-2014   FINALLY!!!  Everyone needs one if they want to pass tech at their drag strip or if you just want that extra safety for...

McLeod

McLeod- Racing Modular Ford 6 Bolt Lightened Steel Flywheel

This is McLeod's custom lightweight steel flywheel for the Modular Ford 6 bolt crankshaft engines. Weighing in at 21 lbs. The steel flywheel is perfect for street applications where easy stop light a

SFI 8-bolt Modular 4.6/5.4/5.0 Flexplate for C-4/AODE/4R70W

JPC Racing 8-Bolt Modular Flexplate Upgrade your drivetrain with the JPC Racing 8-Bolt Modular Flexplate, designed for strength, versatility, and reliability in high-performance Ford applications.

ARP

ARP- PRO Series Modular Flexplate Bolt Kit Set of 8

These bolts are the recommended part for any Ford Modular 8 bolt crankshaft upgrade or if you want to strengthen your 6 bolt unit these will work also.   These Pro series flywheel bolt kits from ARP...

Ford Performance

Ford Performance- 8.8" T-2 Torsen Differential (31spl)

8.8" differential Fits 31 spline axles Torsen T-2 type differential

Hurst

Hurst- 2011-2014 GT Billet Plus 2 Shifter - MT-82

The new 2011 Ford Mustang GT packs a 5.0 punch! And Hursts new Billet/Plus 2 shifter for the 2011 Mustang GT packs a whopping 27% throw reduction and improves upon the mighty 5.0s drive-line, with a...

McLeod

McLeod- 6 bolt Modular Aluminum Flywheel

Aluminum flywheels are ideal for numerous applications. These lightweight units are generally not recommended for naturally aspirated street vehicles, but will work well in lightweight vehicles with...