HPT F2 5862 Turbocharger

Capable of 750 Horsepower 58mm compressor wheel 62mm turbine wheel Ball bearing center section Turbocharger weight with T4 Housing is 19lbs Turbocharger weight with V-Band is 15lbs T3 In...

Mechman 240 Amp Elite Series Racing Alternator for 5.0 Ford

Most Alternators Are Custom Built To Order. Standard Build Time Is 2-3 Weeks. If You Need An Alternator Sooner Than That, Please Contact A Sales Associate To See If Any In-Stock Options Are Available...

Procharger Coyote Crank Support

Is the crank support absolutely mandatory? Not really, but consider it cheap insurance with the Coyote engine, just like billet oil pump gears.  More boost and rpm mean more load on the crank...

TBM Brakes

TBM Brakes - 15-23 Ford Mustang S550 Rear Drag Racing Brake Kit (Reusing Factory Hubs)

  15-22 Ford Mustang S

RGR- Coyote Secondary Timing Chain Kit 15-17 (Gen 2)

Secondary timing kit upgrade for your gen 2 coyote    Much stronger over factory  No more secondary timing failure  Higher HP durable material  Kit Includes secondary gears and chains 

JPC Racing - Coyote Engine secondary Flip Kit (11-17)

With the Use of this tensioner flip kit,  we are able to flip the tensioner on the Left head.  One of the coyotes design flaws is the fact that the tensioner, tensions the drive side of the chain,...

GForce Performance

GForce 2015-2026 Mustang Outlaw Axles - Pair

GForce Engineering OUTLAW Axles are a direct replacement for factory half-shafts and are designed for cars making big power and/or with serious demands on their driveline. The all new Outlaw axles...

GForce Performance

Mustang S550 (2015+) Renegade Axles with Exotic Alloy Outer Stubs

The all new GForce Engineering Renegade Axles are a direct replacement for factory half-shafts and are designed for cars with everything from mild bolt-ons to those running superchargers and turbos...

10.0 GPM Brushless Gear Pump - Signature

Fuel injected engines:– up to 6,900 FWHP on GAS – naturally aspirated– up to 4,900 FWHP on GAS – forced air induction – up to 4,830 FWHP on E85 – naturally aspirated– up to 3,430 FWHP on E85 –...

7.0 GPM Brushless Gear Pump - Signature

Supports Fuel Injected Engines:– up to 4,800 FWHP on GAS – naturally aspirated– up to 3,400 FWHP on GAS – forced air induction – up to 3,360 FWHP on E85 – naturally aspirated– up to 2,380...

5.0 Brushless Gear Pump – Signature

The market leader in fuel delivery systems and components, Aeromotive introduces its first brushless fuel pump series. The 5.0 Brushless Gear Pump, the flagship of Aeromotive electric fuel pumps,...

3.5 Brushless Gear Pump – Signature

The market leader in fuel delivery systems and components, Aeromotive introduces its first brushless fuel pump series. The 3.5 Brushless Gear pump provides the Pro-Series Fuel Pump performance the...

10-17 Mustang GT Stealth Eliminator Race System with 5.0L 4-V Fuel Rails

This Mustang Stealth Fuel System includes the Aeromotive Stealth Eliminator fuel pump, designed to fit inside the stock, OEM Mustang tank and integrate with the stock fuel-level sending unit and...

10-17 Mustang GT Stealth A1000 Race Fuel System with 5.0L 4-V Fuel Rails

This Mustang Stealth Fuel System includes the Aeromotive Stealth A1000 fuel pump, designed to fit inside the stock, OEM Mustang tank and integrate with the stock fuel-level sending unit and...

JPC Racing Cam Sensor Block Off Kit (Each)

Block off your factory cam sensors with these Delete plugs.  Perfect use when switching to a stand alone ECU      Off Road Use only. 

JPC Racing - Coyote Head Water Fittings 12 ORB (Rear of Head)

Rear Head Fittings. By knocking out the factory freeze plugs you can easily install these water fittings to feed water in the rear of the heads on a dry deck system.        

JPC Racing Coyote water pump Heater Fitting (AN Conversion)

JPC Racing Heater Fitting made of 6061 Billet Aluminum , Finished in Anodized Black. This item is great for those wanting to switch their Heating lines to the AN style fitting.  Made In...

Flaming River

Flaming River- 2015-2020 Mustang Manual Rack & Pinion

Introducing the 2015-2020 S550 Mustang Manual Rack and Pinion! The newest addition to Manual Rack & Pinion steering is lighter than the factory Mustang power system - reducing vehicle weight by 10-15...

AEM-X-Series Gauge Faces

AEM Electronics X-Series gauge faces help to revive the look of your dash panel. These specialized replacements are available for a wide range of instrumentation—such as fuel and oil pressure,...

Cometic- MLX 5.0 Gen 2 Coyote Head Gaskets ( Right ) .051

Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer...

Cometic- MLX 5.0 Gen 2 Coyote Head Gaskets ( Right ) .040

Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer...

Cometic- MLX 5.0 Gen 2 Coyote Head Gaskets ( LEFT ) .051

Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer...

Cometic- MLX 5.0 Gen 2 Coyote Head Gaskets ( LEFT ) .040

Our MLX Gasket (Multi-Layer-Steel-Stopper) features an extra 'stopper' fold-over layer providing a torque limiting surface that prevents yeilding of the combustion seals. High temperature polymer...

Cometic- MLS 5.0 Gen 2 Coyote Head Gaskets ( Right) .056

Same Gaskets Used on all JPC in house builds!   The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, its ability to rebound...