Stock control arms are marginal at best. Bushing deflection combined with control arm flex creates erratic handling and inconsistent rear end stability when subjected to the added loads of performance driving. BMR control arms are TIG welded and utilize greaseable 90 durometer spiral fluted polyurethane bushings.
You won't find better quality components. Additionally, our control arms retain the factory designed rear offset, a necessity others overlook resulting in split, binding bushings.
*To retain the factory geometry, ensure the offset end of the LCA is installed on the axle side, with the offset portion of the bushing facing towards the rear differential*
Non adjustable lower control arm
Stronger than stock.