EFI Standalone Systems & Components

Fueltech - Wideband Nano WB-o2

Wideband O2 sensor display and conditioner for Bosch LSU 4.2 sensors.

Fueltech - PEAK & HOLD 8A/2A DRIVER w/ Harness

Peak and Hold 8A/2A Controls up to 4 injectors with impedance below 1.5 ohm 16 Bosch 160lb/h (1600cc) injectors (4 per channel) 8 Siemens low impedance injectors (2 per channel) 4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance...

Racepak- Turbo Speed Sensor For V-Net Dataloggers

This speed sensor allows users to monitor turbo speed to determine the efficiency of their turbocharging system.

Racepak- Transmission Temp Sensor 0-300F for V-Net Dataloggers

This V-Net module allows you to measure transmission temperature, 0-300°F. Comes with a 72” lead.

Racepak- Trans Temp Sensor for V-Net Datalogger

Oil pressure is one of the most important things to monitor in order to ensure the life of your engine. These V-Net pressure sensors and modules plug in to your V-Net logger or dash to provide you with critical information about your transmission and...

Racepak- Head Temperature Sensor For V-Net Dataloggers

This V-Net module allows you to measure cylinder head temperature, 0-600°F. Comes with a 36” lead. Please specify left or right when ordering.

Racepak- Manifold Temp Sensor For V-Net Dataloggers

This V-Net module allows you to measure manifold temperature using a resistive-type sensor, 0-300°F. Comes with a 72” lead.

Racepak- Oil Pressure Sensor For V-Net Data Loggers

Data Acquisition, Racepak, V-Net Module with Sensor, Oil Pressure, 0-150 PSI   Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is...

Racepak- Oil Temperature Sensor For V-Net Data Loggers

Data Acquisition, Racepak, V-Net Module with Sensor, Oil Temperature, 0-300 degrees F   Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net...

Racepak- Non-Contact Infra-Red Temperature Sensor

Data Acquisition, Racepak, Temperature Sensor, Non-Contact Infra-Red, 0-300 Degrees F   Racepak non-contact infra-red temperature sensors are designed specifically for the motorsports market. These compact but rugged sensors are capable of...

FuelTech- Dashboard insert Panel for FT600

FuelTech Dashboard insert Panel for FT600 ***Modifications are required to fit specific vehicle. Panels do not come trimmed down or with a carbon fiber decal.

FuelTech- Water Temperature Sensor

Water Temperature Sensor   GM style water temperature sensor   Standard CLT sensor for all FuelTech ECU   3/8” NPT thread: ***Water Temperature Sensor PLUG KIT may be required!  

FuelTech- Dual valve block

Dual solenoid boost controller valve block   Use with FT500 and FT600 integrated boost controller   Connections:   Pressure input: 1/8" Output to wastegate: 1/8"   Wastegate pressure sensor is also needed for FT500/FT600...

FuelTech- Air Temperature Sensor

Air Temperature sensor   GM style intake air temperature sensor   Standard IAT sensor for all FuelTech ECU   3/8” NPT thread: ***Air Temperature sensor PLUG KIT may be required!

FuelTech- WB-o2 Sensor

Bosch LSU 4.2 wideband sensor   Used with any FuelTech wideband conditioner (WB-O2 Slim, WB-O2 Datalogger or Alcohol O2)   Can not be used with leaded fuel, diesel or 2 stroke engines. The sensor life is drastically reduced and it...

FuelTech- WB-o2 Sensor - Alcohol

NTK wideband sensor designed for high accuracy and low AFR   Used with FuelTech Alcohol O2   Requires free-air calibration   M18x1.5 pipe thread

FuelTech- PS-1500 Pressure Sensor

PS-1500 Pressure Sensor   0-1500 psi (5V - Use w/ FT500 and V8 PRO Harness)

MagnaFuel- Pro Outlaw 1000 Series Belt Driven Pump (10.5 GPM), Black

Outlaw Series Engine Hp: up to 3,000+¹ Belt drive with industry standard coupling for instant swap to high performance.   Tighter tolerances for easy priming, quick and reliable starts Flow rates up to 10.5 gpm at 100psi for...

Holley- LS Coli Harness

Includes a pair of coil harnesses for an 8 cylinder engine Similar to factory GM LSx coil harnesses For use with Holley HP or Dominator ECU

FAST- 87mm Coyote Big Mouth Throttle Body (Cable Operated w/GM IAC and TPS)

CURRENTLY ON BACK ORDER   Looking for a cable drive throttle body for your coyote?  FAST now offers a 87mm cable drive throttle body for the Coyote engines. This works with the Boss 302 and stock GT style intakes. This throttle body comes...

Fore- F10 Stainless Steel Fuel Filter

Inline fuel filter, designed for use after fuel pumps and before injectors. Exceeds Bosch fuel injector requirement of 5µ, minimum 82% efficiency (ISO/TR 19438) E85 compatible with optional stainless filter...

Fore- F2i Pressure Regulator

Dual Pressure Ports (-8an O Ring) Ceramic/Stainless valve Viton/Nomex Composite Diaphragm Fluoropolymer Coated Spring Lifetime warranty - Compatible with all fuel...

Holley- EFI TFI Ignition Harness

Need to adapter your holley EFI system to a TFI Ignition? This is the harness you need! Works great with 1987-1995 Mustangs!

Holley- Dominator EFI Auxiliary Output Harness

For Holley Dominator EFI Auxillary Output Harness   Dominator EFI Connector J2B Auxiliary Harness