TBM XS3 Front Extreme Street Brake Kit for the 2024+ Mustang S650
Give your S650 strong street braking without sacrificing the ability to run compact wheels. TBM’s XS3 front kit combines billet four-piston calipers with 12.19-inch slotted and vented rotors, delivering race-derived pedal feel, improved cooling and a substantial reduction in front brake weight.
Kit Includes
- Two XS3 four-piston billet calipers in your selected powder-coat color
- 12.19-inch vented left and right rotors (3-121981087-1 and 3-121981087-2)
- Two billet-aluminum brake hats (204-0209BL)
- Two caliper brackets (17-0061)
- Complete Hawk HPS pad set (6-0002HPS)
- Hardware kit (011-0278)
Street Performance Features
- Saves approximately 58 pounds compared with the factory front brakes
- 6061 billet-aluminum caliper housings with four 1.75-inch pistons per caliper
- Crossflow caliper design promotes balanced fluid pressure and clean packaging
- Dark-zinc-plated, slotted and vented rotors balance cooling, durability and corrosion resistance
- Hawk HPS pads provide strong street stopping with controlled noise and brake dust
- Available in Onyx Black, Race Red, Satin Metallic Blue, Velocity Yellow and Gunmetal Gray
- Made in the USA
Fitment and Installation Notes
- Fits 2024+ Ford Mustang S650 models
- Designed to fit most 15-inch and larger wheels when knuckle and wheel-barrel clearance permit; always verify clearance before installation
- Kit weight is approximately 16.25 pounds per side, or 32.50 pounds total
- Spindle modification is required; review TBM’s installation instructions before beginning
- Use approved DOT 3, DOT 4 or DOT 5.1 brake fluid only; do not use silicone-based fluid
- Proper master-cylinder sizing and pedal ratio are required for correct operation
California Proposition 65 Warning: Cancer and reproductive harm — www.P65Warnings.ca.gov.
