Aeromotive

Aeromotive- BRUSHLESS IN-TANK PUMP 2011-2017 MUSTANG (S197 & S550), 2018-2020 (GT/ECOBOOST)

Direct Drop in for OEM Tank   Single Pump Simplifies Wiring and Plumbing Over Multi-Pump Configurations   Brushless Motor with Remote Mount Controller for Reduced Amp Draw   Utilizes Patented Aeromotive Jet Siphon in...

Strange

Strange- Evolution Dynamic Drive Mount Rear Brake Kit For Late Big Ford

Designed Specifically For Drag Racing Evolution Rear Brake KitFor Late Big Ford / Torino Housing Ends – H1137 Requires• 2.500″ brake offset• Ball style axle bearings * * Caliper mount relief isn’t correct for tapered...

Strange

Strange- 05-14 Mustang Evolution Dynamic Drive Mount Front Brake Kit Reuses OEM Hubs

Designed Specifically For Drag Racing Evolution Front Brake Kit2005-2014 Mustang Reuses Factory Wheel Hubs Evolution S Dynamic Drive Mount (DDM) Stainless Steel Rotors – B2798L / B2798R• Evolution S Rotor mounts to Billet...

Strange

Strange- 05-14 Mustang Evolution Dynamic Drive Mount Rear Brake Kit For Strange 3.150" Ford 8.8 Housing Ends

Designed Specifically For Drag Racing Evolution Rear Brake KitFor Strange 3.150″ 86-93 Mustang 8.8 housing ends – H1138 Requires• Aftermarket axles with 5 lug bolt pattern• Ball style axle bearings *• 2.500″ brake...

Strange

Strange- 15-20 Mustang Evolution Dynamic Drive Mount Rear Brake Kit

Designed Specifically For Drag Racing Evolution Rear Brake KitFor 2015-2020 Mustang GT Evolution S Dynamic Drive Mount (DDM) Stainless Steel Rotors – B2798L / B2798R• Evolution S Rotor mounts to Billet Aluminum DDM Hat...

Strange

Strange- 15-20 Mustang Evolution Dynamic Drive Mount Front Brake Kit 4 1/2″ BC

Designed Specifically For Drag Racing Evolution Front Brake Kit2015-2020 Mustang Evolution S Dynamic Drive Mount (DDM) Stainless Steel Rotors – B2798L / B2798R• Evolution S Rotor mounts to Billet Aluminum DDM Hat – reducing rotating...

05-14 S197 Mustang OEM ends using Strange C-clip Eliminator Kit 001-0242

05-14 S197 Mustang OEM ends using Strange C-clip Eliminator Kit 001-0242 2.585 Axle offset 5 ON 4.50 & 5 ON 4.75 ½ & 5/8 STUDS Kit includes: F3 4 piston calipers 002-0056SSP-1 / 002-0056SSP-2 #1 compound low temp track...

Bowler Transmission

Bowler- Tremec T-56 & Magnum - ALL-IN-ONE Harness w/ Reverse Lock Out

7100000 For Standard T-56 Magnum, Magnum XL, & Mustang GT500 TR6060 7100001 For Borg Warner GM Non-Magnum T-56 (93-2002 Camaro/Firebird). Has Borg Warner GM VSS connector (will not work for Ford or Viper) 7100002 For GM...

JPC Custom Driveshaft for TH400/PowerGlide

JPC Custom driveshafts have been used in PowerGlide and Th400 applications and has provided it for our kits for many years and now we are making it available for everyone. Simply select the options above that match your application and add to cart...

NanoPro

The 3-in-1 NanoPRO is an O2 Conditioner, Dash Display, and Switch Panel in one! O2 Sensor: The NanoPRO is compatible with 5 different wideband O2 sensors (Bosch 4.2, Bosch 4.9, Bosch 5.2, NTK ZFAS-U2 “laboratory,” and NTK ZFAS-A2). The...

Whipple Superchargers

Whipple Supercharger - 2024 Mustang Supercharger Kit

  Elevate Your Mustang Experience: The 2024 Ford Mustang, equipped with the revolutionary Whipple Gen 6 3.0L supercharger, becomes an unrivaled performance titan. Experience the thrill of 810HP in Stage 1 and an astounding 855HP in Stage 2, each...

Optic Armor - Ford Mustang 2015+ REAR window 3/16in drop-in black-out

includes Optic Armor coating inside and out, Factory matching black-out perimeter, trimmed to factory spec. Saves 11lbs over factory glass. DARK TINT 18% (LIGHT TRANSMISSION).

TBM Brakes

TBM Brakes -2024 Ford Mustang S650 Medium Duty Drag Racing Front Brake Kit (Reusing Factory Hubs)

Description This kit fits the following: 2024 Ford Mustang (reusing factory hubs) medium duty Weight: 23 lbs Kit includes: F3 4 piston calipers 002-0192SSP #1 compound low temp track pads 6-0102W 11.75 x .500” thermally treated revolution...

TBM Brakes

TBM Brakes - 2024 Ford Mustang S650 Rear Drag Racing Brake Kit (Reusing Factory Hubs)

  15-22 Ford Mustang S650 Rear Drag Racing Brake Kit (Reusing Factory Hubs)  Note: This Kit retains usage of factory ABS functionality Note: This Kit requires usage of an included drill fixture to drill and tap holes in factory spindles for use...

Nitrous Express

Nitrous Express - Direct Port Plate System For Coyote Engine w/10lb bottle

The Nitrous Express direct port nitrous plates are designed to fit factory 2018+ 5.0L Intake manifolds or the Boss intake manifolds. The 2018+ manifolds are a direct bolt on replacement for any of your modern 5.0 coyote engines and provide cheap, easy...

M&M Transmissions

M&M Transmissions - 3 Speed Reverse Pattern Shifter *Black

3-Speed Reverse Pattern TH400 ShifterIncludes shifter, 5-ft cable, shift arm, pan bracket, neutral safety switch, CO2 activation cylinder*, and flat floor mount.* CO2 tank not included

M&M Transmissions

M&M Transmissions - 3 Speed Clean Neutral Shifter *Black

3-Speed Safe Neutral TH400 ShifterIncludes shifter, 5-ft cable, shift arm, pan bracket, neutral safety switch, CO2 activation cylinder*, and flat floor mount.* CO2 tank not included

CORSA Performance

Corsa - 2018-2023 Mustang GT Cold Air Intake Kit

DRYTECH (Dry Filter No oil)  The CORSA Performance 2018+ Ford Mustang GT Open Element Carbon Fiber air intake features a 100% carbon fiber air duct and black powder coat aluminum heat shield pairing aesthetics and engineering for maximum strength...

CORSA Performance

Corsa - 2015-2017 Mustang GT Cold Air Intake Kit

  2015-2017 Ford Mustang GT 5.0L V8*CARB EO Unavailable**Fits models with 2 fittings built prior to Sept 2016.***2017 models built May-August 2016 must have 2 fittings. Outflows Stock Intake Improving Performance Shields Engine Heat Reducing...

CORSA Performance

Corsa - 2015-2017 Mustang GT Xtreme Cat-back Exhaust

3.0" Cat-Back, Dual Rear Exit with Single 4.5" Polished Pro-Series TipsXtreme Sound Level**FASTBACK FITMENT ONLY** 2015-2017 Mustang GT Premium Stainless Steel Construction Easy Bolt-on Installation No Welding Needed Patented No-Drone, Reflective...

CORSA Performance

Corsa - 2018-2023 Mustang GT 5.0L Xtreme Exhaust

3.0" Cat-Back, Dual Rear Exit with Twin 4.0" Polished Pro-Series TipsXtreme Sound Level**FOR NON ACTIVE EXHAUST** **FASTBACK FITMENT (NOT CONVERTIBLE)** Premium Stainless Steel Construction Easy Bolt-on Installation No Welding Needed Patented...

Holley

Holley - ULTRA LO-RAM FORD COYOTE BLACK

Finally, an affordable Coyote intake manifold that also performs! The Hi-Ram and Ultra Lo-Ram are designed to fit stock bolt pattern OE heads found on the 2011-2023 Ford 5.0 Coyotes and related engine families, such as, Voodoo and Predators. These kits...

GForce Performance

G Force - 2020+ Mustang GT500 Outlaw Axles

Specific notes for 2020+ Mustang GT500: GT500 axles are designed to work with the factory 34 spline differential and 33 spline wheel hubs These axles quickly became a top seller for anyone looking to modify or take their GT500 to the track. Our average...

AFIS Injector - 800 LB/HR

DETAILS Versatile design supports Methanol, Ethanol, Gas and CNG applications One piece construction offers OEM quality and reliability without any gimmicks No internal O-Rings Standard body (1.85" Long), EV1 Connector, Low Impedance...