JPC- Custom Fabricated Paxton/Vortech/Procharger Reservoir 11-14 GT (Backordered) MSRP: Was: Now: $349.99 Add to Cart
JPC- 2010-2024 Mustang Front & Rear Lightweight Bumper Support Package MSRP: Was: Now: $374.50 Add to Cart
JPC Racing - Coyote Water Pump Bolt on Water inlet -16 ORB (Thermostat Delete) MSRP: Was: Now: $69.00 Add to Cart
RGR 2018+ Gen3 Coyote Cam Lockout Kit The RGR cam lockout kit for the 2018+ Gen3 Coyote engine are one of the most durable and precise cam lockout kits available. These are the only cam lockout kit on the market that allows the gear to be centered into the camshaft. These gears allow for... MSRP: Was: Now: $499.99 Choose Options
RGR 2015-2017 Coyote Cam Lockout Kit The RGR cam lockout kit for the 2015-2017 Coyote engine are one of the most durable and precise cam lockout kits available. These are the only cam lockout kit on the market that allows the gear to be centered into the camshaft. These gears allow for full... MSRP: Was: Now: $479.99 Choose Options
RGR 2011-2014 Coyote Cam Lockout Kit The RGR cam lockout kit for the 2011-2014 Coyote engine are one of the most durable and precise cam lockout kits available. These are the only cam lockout kit on the market that allows the gear to be centered into the camshaft. These gears allow for full... MSRP: Was: Now: $419.95 Choose Options
JPC- 2010-2014 Mustang GT/GT500/Boss Line Lock Kit *****CLICK OVER TO THE VIDEO TAB FOR A VIDEO INSTALLATION GUIDE***** This is the only kit on the market that will bolt-on to your 2010 and New 2011-2014 Mustang GT/GT500/Boss. System will fit any brake system Polished Stainless Steel 8mm... MSRP: Was: Now: $210.00 Add to Cart
JPC- Coyote VCT Actuator Block off When Deleting the VCT on your Coyote Engine 2011-2017 delete the ugly VCT actuators with this Billet 6061 aluminum block off. This is a complete kit that includes 4 block offs enough to do 1 entire engineMade in the USACNC'd 6061 Billet Aluminum Easy... MSRP: Was: Now: $89.00 Choose Options
JPC- Custom Fabricated Paxton/Vortech/Procharger Reservoir 11-14 GT (Backordered) As many of you know the reservoir that's included in the kit tends to leak at the top leaving splatter all over your freshly cleaned valve covers and strut tower. In some cases the reservoir that included with the kit will crack open. Also... MSRP: Was: Now: $349.99 Add to Cart
JPC- 2011-up Mustang GT Fuel Drain Kit Ever tried to drain the fuel out of your 2011+ Mustang GT? Give it a try and you'll find that it's nearly impossible to do. With the JPC Fuel drain kit you can drain the fuel quickly and easily allowing you to switch fuels in a matter of... MSRP: Was: Now: $229.00 Choose Options
JPC- 2010-2024 Mustang Chromoly Lightweight Front Bumper Support Custom made lightweight chromoly front bumper support. THIS WILL FIT HELLION UPGRADED 6 INCH INTERCOOLER ONLY WEIGHTS 2lbs 8oz. / Stock bumper is 13lbs This allows you to get rid of your factory bumper and keep your front clip from moving... MSRP: Was: Now: $185.00 Add to Cart
JPC- 2010-2024 Mustang Front & Rear Lightweight Bumper Support Package Custom made lightweight chromoly front & rear bumper support kit. Front weighs in at 2lbs 8oz. / Stock front bumper is 13lbs Rear weighs in at 2lbs 10oz. / Stock rear bumper is almost 16lbs TOTAL WEIGHT SAVINGS OF ALMOST 24lbs!! This allows you... MSRP: Was: Now: $374.50 Add to Cart
JPC- 2005-2009 Mustang Chromoly Lightweight Front Bumper Support Custom made lightweight chromoly front bumper support. ONLY WEIGHTS 2lbs 8oz. / Stock bumper is 13lbs This allows you to get rid of your factory bumper and keep your front clip from moving around. Great lightweight addition. Mounting brackets are... MSRP: Was: Now: $185.00 Add to Cart
JPC Racing - Coyote Engine secondary Flip Kit (11-17) With the Use of this tensioner flip kit, we are able to flip the tensioner on the Left head. One of the coyotes design flaws is the fact that the tensioner, tensions the drive side of the chain, which allows for a lot of movement your cams... MSRP: Was: Now: $70.00 Add to Cart
JPC Racing - GT500 Valve Cover AN Conversion Replace your old worn out plastic valve cover fittings to a clean aluminum AN style fitting. These fittings convert from the stock plastic to billet aluminum ORB style fittings. Kit includes 2 JPC Racing... MSRP: Was: Now: $99.00 Add to Cart
JPC Racing - Coyote Water Pump Bolt on Water inlet -16 ORB (Thermostat Delete) Clean up your engine bay with this simple Billet Thermostat delete. This will remove the the thermostat and all the factory hoses. Convert your water system to -16 AN fittings with no welding required. Kit... MSRP: Was: Now: $69.00 Add to Cart
JPC Racing - Coyote Thermostat Housing AN Conversion (-16 ORB) Converting your upper radiator hose has never been easier. With this simple adaptor you can easily swap over to a -16 ORB style fitting and keep your factory thermostat in place MSRP: Was: Now: $69.00 Add to Cart
JPC Racing Cam Sensor Block Off Kit (Each) Block off your factory cam sensors with these Delete plugs. Perfect use when switching to a stand alone ECU Off Road Use only. MSRP: Was: Now: $20.00 Choose Options
JPC Racing - Coyote Head Water Fittings 12 ORB (Front of Head) When Deleting the Heater core or swapping to a dry deck head, look no further and get a Set of our Cylinder head water fittings. Delete all the factory lines and plastic clips and switch over to a robust AN lines. For maximum durability... MSRP: Was: Now: $110.00 Add to Cart
JPC Racing - Coyote Head Water Fittings 12 ORB (Rear of Head) Rear Head Fittings. Buy Knocking out the factory freeze plugs you can easily install these water fittings to feed water in the rear of the heads on a dry deck system. MSRP: Was: Now: $120.00 Add to Cart
JPC Racing- Coyote Water pump Heater Hose Block Off JPC Racing, heater hose block off, This Billet aluminum plug allows you to easily block off the heater hose port on the water pump. Perfect solution for anyone looking to simplify their water system in a swap or race car. MSRP: Was: Now: $49.00 Add to Cart
JPC Racing Coyote water pump Heater Fitting (AN Conversion) JPC Racing Heater Fitting made of 6061 Billet Aluminum , Finished in Anodized Black. This item is great for those wanting to switch their Heating lines to the AN style fitting. Made In USA *Hardware Included* MSRP: Was: Now: $49.00 Add to Cart
JPC Racing Roll Bar Dome Light Mount Tired of not being able to see in your street/race car at night? Introducing our ALL NEW 6061 Billet Aluminum Roll Bar Dome Light Mount which can support 3 LED (6mm) lights to provide ample light throughout your interior! Made In USA *Bolts... MSRP: Was: Now: $109.00 Choose Options
JPC Racing Roll Bar Mounts Universal JPC Racing Roll Bar Mounts made out of 6061 billet aluminum, finished in Anodized Black. These Universal mounts can be used in tons of applications, You can check out our expanding line of accessories, or use it to build your own... MSRP: Was: Now: $40.00 Choose Options
JPC Racing - Coyote Rear Water Fittings (Rear of Head) JPC Racing – Rear Cylinder Head Water Fittings,(pair) 15013 After years of pushing the limits on the coyote platform we have designed a water fitting for the rear of the heads. This is a perfect solution for tight areas close to the... MSRP: Was: Now: $120.00 Choose Options
JPC Racing - FuelTech FT Spark Roll Bar Mount Now available!!!!!!!! Brand new release: JPC Racing just released their brand new line of roll bar mounts starting with the Fueltech line. Mount your Fueltech IFT Spark with 1 easy step. Features... MSRP: Was: Now: $99.95 Choose Options
JPC Racing - FuelTech FT600 Roll Bar Mount Now available!!!!!!!! Brand new release: JPC Racing just released their brand new line of roll bar mounts starting with the Fueltech line. Mount your Fueltech with 1 easy step. Features : Laser... MSRP: Was: Now: $99.95 Choose Options
